--- /dev/null
+*.bak
+/test/*
+lib
+*.s
+/certs/demo/*.0
+/apps/openssl
+/crypto/buildinf.h
+/*.pc
+/rehash.time
+/crypto/opensslconf.h
+/Makefile
+++ /dev/null
-### Generated automatically from Makefile.org by Configure.
-
-##
-## Makefile for OpenSSL
-##
-
-VERSION=1.0.1j
-MAJOR=1
-MINOR=0.1
-SHLIB_VERSION_NUMBER=1.0.0
-SHLIB_VERSION_HISTORY=
-SHLIB_MAJOR=1
-SHLIB_MINOR=0.0
-SHLIB_EXT=
-PLATFORM=dist
-OPTIONS= no-ec_nistp_64_gcc_128 no-gmp no-jpake no-krb5 no-md2 no-rc5 no-rfc3779 no-sctp no-shared no-store no-unit-test no-zlib no-zlib-dynamic static-engine
-CONFIGURE_ARGS=dist
-SHLIB_TARGET=
-
-# HERE indicates where this Makefile lives. This can be used to indicate
-# where sub-Makefiles are expected to be. Currently has very limited usage,
-# and should probably not be bothered with at all.
-HERE=.
-
-# INSTALL_PREFIX is for package builders so that they can configure
-# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
-# Normally it is left empty.
-INSTALL_PREFIX=
-INSTALLTOP=/usr/local/ssl
-
-# Do not edit this manually. Use Configure --openssldir=DIR do change this!
-OPENSSLDIR=/usr/local/ssl
-
-# NO_IDEA - Define to build without the IDEA algorithm
-# NO_RC4 - Define to build without the RC4 algorithm
-# NO_RC2 - Define to build without the RC2 algorithm
-# THREADS - Define when building with threads, you will probably also need any
-# system defines as well, i.e. _REENTERANT for Solaris 2.[34]
-# TERMIO - Define the termio terminal subsystem, needed if sgtty is missing.
-# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
-# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
-# DEVRANDOM - Give this the value of the 'random device' if your OS supports
-# one. 32 bytes will be read from this when the random
-# number generator is initalised.
-# SSL_FORBID_ENULL - define if you want the server to be not able to use the
-# NULL encryption ciphers.
-#
-# LOCK_DEBUG - turns on lots of lock debug output :-)
-# REF_CHECK - turn on some xyz_free() assertions.
-# REF_PRINT - prints some stuff on structure free.
-# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
-# MFUNC - Make all Malloc/Free/Realloc calls call
-# CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
-# call application defined callbacks via CRYPTO_set_mem_functions()
-# MD5_ASM needs to be defined to use the x86 assembler for MD5
-# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
-# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
-# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8. It must
-# equal 4.
-# PKCS1_CHECK - pkcs1 tests.
-
-CC= cc
-CFLAG= -O
-DEPFLAG= -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_STORE -DOPENSSL_NO_UNIT_TEST
-PEX_LIBS=
-EX_LIBS=
-EXE_EXT=
-ARFLAGS=
-AR= ar $(ARFLAGS) r
-RANLIB= /usr/bin/ranlib
-NM= nm
-PERL= /usr/bin/perl
-TAR= tar
-TARFLAGS= --no-recursion --record-size=10240
-MAKEDEPPROG=makedepend
-LIBDIR=lib
-
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAG=$(CFLAG)
-
-# For x86 assembler: Set PROCESSOR to 386 if you want to support
-# the 80386.
-PROCESSOR=
-
-# CPUID module collects small commonly used assembler snippets
-CPUID_OBJ= mem_clr.o
-BN_ASM= bn_asm.o
-DES_ENC= des_enc.o fcrypt_b.o
-AES_ENC= aes_core.o aes_cbc.o
-BF_ENC= bf_enc.o
-CAST_ENC= c_enc.o
-RC4_ENC= rc4_enc.o rc4_skey.o
-RC5_ENC= rc5_enc.o
-MD5_ASM_OBJ=
-SHA1_ASM_OBJ=
-RMD160_ASM_OBJ=
-WP_ASM_OBJ= wp_block.o
-CMLL_ENC= camellia.o cmll_misc.o cmll_cbc.o
-MODES_ASM_OBJ=
-ENGINES_ASM_OBJ=
-PERLASM_SCHEME=
-
-# KRB5 stuff
-KRB5_INCLUDES=
-LIBKRB5=
-
-# Zlib stuff
-ZLIB_INCLUDE=
-LIBZLIB=
-
-# TOP level FIPS install directory.
-FIPSDIR=/usr/local/ssl/fips-2.0
-
-# This is the location of fipscanister.o and friends.
-# The FIPS module build will place it $(INSTALLTOP)/lib
-# but since $(INSTALLTOP) can only take the default value
-# when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build may be different so hard
-# code the path.
-
-FIPSLIBDIR=
-
-# The location of the library which contains fipscanister.o
-# normally it will be libcrypto unless fipsdso is set in which
-# case it will be libfips. If not compiling in FIPS mode at all
-# this is empty making it a useful test for a FIPS compile.
-
-FIPSCANLIB=
-
-# Shared library base address. Currently only used on Windows.
-#
-
-BASEADDR=0xFB00000
-
-DIRS= crypto ssl engines apps test tools
-ENGDIRS= ccgost
-SHLIBDIRS= crypto ssl
-
-# dirs in crypto to build
-SDIRS= \
- objects \
- md4 md5 sha mdc2 hmac ripemd whrlpool \
- des aes rc2 rc4 idea bf cast camellia seed modes \
- bn ec rsa dsa ecdsa dh ecdh dso engine \
- buffer bio stack lhash rand err \
- evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
- cms pqueue ts srp cmac
-# keep in mind that the above list is adjusted by ./Configure
-# according to no-xxx arguments...
-
-# tests to perform. "alltests" is a special word indicating that all tests
-# should be performed.
-TESTS = alltests
-
-MAKEFILE= Makefile
-
-MANDIR=$(OPENSSLDIR)/man
-MAN1=1
-MAN3=3
-MANSUFFIX=
-HTMLSUFFIX=html
-HTMLDIR=$(OPENSSLDIR)/html
-SHELL=/bin/sh
-
-TOP= .
-ONEDIRS=out tmp
-EDIRS= times doc bugs util include certs ms shlib mt demos perl sf dep VMS
-WDIRS= windows
-LIBS= libcrypto.a libssl.a
-SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
-SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_LIBS=
-SHARED_LIBS_LINK_EXTS=
-SHARED_LDFLAGS=
-
-GENERAL= Makefile
-BASENAME= openssl
-NAME= $(BASENAME)-$(VERSION)
-TARFILE= $(NAME).tar
-WTARFILE= $(NAME)-win.tar
-EXHEADER= e_os2.h
-HEADER= e_os.h
-
-all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
-
-# as we stick to -e, CLEARENV ensures that local variables in lower
-# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
-# shell, which [annoyingly enough] terminates unset with error if VAR
-# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
-# which terminates unset with error if no variable was present:-(
-CLEARENV= TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS} \
- $${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \
- $${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \
- $${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
- $${EXHEADER+EXHEADER} $${HEADER+HEADER} \
- $${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
- $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
- $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \
- $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
- $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
-
-BUILDENV= PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
- CC='$(CC)' CFLAG='$(CFLAG)' \
- AS='$(CC)' ASFLAG='$(CFLAG) -c' \
- AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \
- CROSS_COMPILE='$(CROSS_COMPILE)' \
- PERL='$(PERL)' ENGDIRS='$(ENGDIRS)' \
- SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)' \
- INSTALL_PREFIX='$(INSTALL_PREFIX)' \
- INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)' \
- LIBDIR='$(LIBDIR)' \
- MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
- DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)' \
- MAKEDEPPROG='$(MAKEDEPPROG)' \
- SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \
- KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)' \
- ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \
- EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
- SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
- PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)' \
- CPUID_OBJ='$(CPUID_OBJ)' \
- BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' \
- AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
- BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \
- RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \
- SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)' \
- MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \
- RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
- WP_ASM_OBJ='$(WP_ASM_OBJ)' \
- MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
- ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)' \
- PERLASM_SCHEME='$(PERLASM_SCHEME)' \
- FIPSLIBDIR='${FIPSLIBDIR}' \
- FIPSDIR='${FIPSDIR}' \
- FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
- THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
-# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
-# which in turn eliminates ambiguities in variable treatment with -e.
-
-# BUILD_CMD is a generic macro to build a given target in a given
-# subdirectory. The target must be given through the shell variable
-# `target' and the subdirectory to build in must be given through `dir'.
-# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
-# BUILD_ONE_CMD instead.
-#
-# BUILD_ONE_CMD is a macro to build a given target in a given
-# subdirectory if that subdirectory is part of $(DIRS). It requires
-# exactly the same shell variables as BUILD_CMD.
-#
-# RECURSIVE_BUILD_CMD is a macro to build a given target in all
-# subdirectories defined in $(DIRS). It requires that the target
-# is given through the shell variable `target'.
-BUILD_CMD= if [ -d "$$dir" ]; then \
- ( cd $$dir && echo "making $$target in $$dir..." && \
- $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
- ) || exit 1; \
- fi
-RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
-BUILD_ONE_CMD=\
- if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
- $(BUILD_CMD); \
- fi
-
-reflect:
- @[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
-
-sub_all: build_all
-build_all: build_libs build_apps build_tests build_tools
-
-build_libs: build_crypto build_ssl build_engines
-
-build_crypto:
- @dir=crypto; target=all; $(BUILD_ONE_CMD)
-build_ssl:
- @dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines:
- @dir=engines; target=all; $(BUILD_ONE_CMD)
-build_apps:
- @dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests:
- @dir=test; target=all; $(BUILD_ONE_CMD)
-build_tools:
- @dir=tools; target=all; $(BUILD_ONE_CMD)
-
-all_testapps: build_libs build_testapps
-build_testapps:
- @dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-
-fips_premain_dso$(EXE_EXT): libcrypto.a
- [ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
- -DFINGERPRINT_PREMAIN_DSO_LOAD -o $@ \
- $(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
- libcrypto.a $(EX_LIBS)
-
-libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
- @if [ "$(SHLIB_TARGET)" != "" ]; then \
- if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
- FIPSLD_LIBCRYPTO=libcrypto.a ; \
- FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
- export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
- fi; \
- $(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared && \
- (touch -c fips_premain_dso$(EXE_EXT) || :); \
- else \
- echo "There's no support for shared libraries on this platform" >&2; \
- exit 1; \
- fi
-
-libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
- @if [ "$(SHLIB_TARGET)" != "" ]; then \
- $(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
- else \
- echo "There's no support for shared libraries on this platform" >&2; \
- exit 1; \
- fi
-
-clean-shared:
- @set -e; for i in $(SHLIBDIRS); do \
- if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
- tmp="$(SHARED_LIBS_LINK_EXTS)"; \
- for j in $${tmp:-x}; do \
- ( set -x; rm -f lib$$i$$j ); \
- done; \
- fi; \
- ( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
- if [ "$(PLATFORM)" = "Cygwin" ]; then \
- ( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
- fi; \
- done
-
-link-shared:
- @ set -e; for i in $(SHLIBDIRS); do \
- $(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
- LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
- LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
- symlink.$(SHLIB_TARGET); \
- libs="$$libs -l$$i"; \
- done
-
-build-shared: do_$(SHLIB_TARGET) link-shared
-
-do_$(SHLIB_TARGET):
- @ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
- if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
- libs="$(LIBKRB5) $$libs"; \
- fi; \
- $(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
- LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
- LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
- LIBDEPS="$$libs $(EX_LIBS)" \
- link_a.$(SHLIB_TARGET); \
- libs="-l$$i $$libs"; \
- done
-
-libcrypto.pc: Makefile
- @ ( echo 'prefix=$(INSTALLTOP)'; \
- echo 'exec_prefix=$${prefix}'; \
- echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
- echo 'includedir=$${prefix}/include'; \
- echo ''; \
- echo 'Name: OpenSSL-libcrypto'; \
- echo 'Description: OpenSSL cryptography library'; \
- echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lcrypto'; \
- echo 'Libs.private: $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
-
-libssl.pc: Makefile
- @ ( echo 'prefix=$(INSTALLTOP)'; \
- echo 'exec_prefix=$${prefix}'; \
- echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
- echo 'includedir=$${prefix}/include'; \
- echo ''; \
- echo 'Name: OpenSSL'; \
- echo 'Description: Secure Sockets Layer and cryptography libraries'; \
- echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
- echo 'Libs.private: $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
-
-openssl.pc: Makefile
- @ ( echo 'prefix=$(INSTALLTOP)'; \
- echo 'exec_prefix=$${prefix}'; \
- echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
- echo 'includedir=$${prefix}/include'; \
- echo ''; \
- echo 'Name: OpenSSL'; \
- echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
- echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
- echo 'Libs.private: $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
-
-Makefile: Makefile.org Configure config
- @echo "Makefile is older than Makefile.org, Configure or config."
- @echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
- @false
-
-libclean:
- rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
-
-clean: libclean
- rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
- @set -e; target=clean; $(RECURSIVE_BUILD_CMD)
- rm -f $(LIBS)
- rm -f openssl.pc libssl.pc libcrypto.pc
- rm -f speed.* .pure
- rm -f $(TARFILE)
- @set -e; for i in $(ONEDIRS) ;\
- do \
- rm -fr $$i/*; \
- done
-
-makefile.one: files
- $(PERL) util/mk1mf.pl >makefile.one; \
- sh util/do_ms.sh
-
-files:
- $(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
- @set -e; target=files; $(RECURSIVE_BUILD_CMD)
-
-links:
- @$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
- @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
- @set -e; target=links; $(RECURSIVE_BUILD_CMD)
-
-gentests:
- @(cd test && echo "generating dummy tests (if needed)..." && \
- $(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
-
-dclean:
- rm -rf *.bak include/openssl certs/.0
- @set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
-
-rehash: rehash.time
-rehash.time: certs apps
- @if [ -z "$(CROSS_COMPILE)" ]; then \
- (OPENSSL="`pwd`/util/opensslwrap.sh"; \
- [ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
- OPENSSL_DEBUG_MEMORY=on; \
- export OPENSSL OPENSSL_DEBUG_MEMORY; \
- $(PERL) tools/c_rehash certs/demo) && \
- touch rehash.time; \
- else :; fi
-
-test: tests
-
-tests: rehash
- @(cd test && echo "testing..." && \
- $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
- OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
-
-report:
- @$(PERL) util/selftest.pl
-
-depend:
- @set -e; target=depend; $(RECURSIVE_BUILD_CMD)
-
-lint:
- @set -e; target=lint; $(RECURSIVE_BUILD_CMD)
-
-tags:
- rm -f TAGS
- find . -name '[^.]*.[ch]' | xargs etags -a
-
-errors:
- $(PERL) util/ck_errf.pl -strict */*.c */*/*.c
- $(PERL) util/mkerr.pl -recurse -write
- (cd engines; $(MAKE) PERL=$(PERL) errors)
-
-stacks:
- $(PERL) util/mkstack.pl -write
-
-util/libeay.num::
- $(PERL) util/mkdef.pl crypto update
-
-util/ssleay.num::
- $(PERL) util/mkdef.pl ssl update
-
-crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
- $(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
-crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
- $(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
-crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
- $(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
-
-apps/openssl-vms.cnf: apps/openssl.cnf
- $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
-
-crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
- $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
-
-
-TABLE: Configure
- (echo 'Output of `Configure TABLE'"':"; \
- $(PERL) Configure TABLE) > TABLE
-
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
-
-# Build distribution tar-file. As the list of files returned by "find" is
-# pretty long, on several platforms a "too many arguments" error or similar
-# would occur. Therefore the list of files is temporarily stored into a file
-# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
-# tar does not support the --files-from option.
-tar:
- find . -type d -print | xargs chmod 755
- find . -type f -print | xargs chmod a+r
- find . -type f -perm -0100 -print | xargs chmod a+x
- find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
- $(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
- tardy --user_number=0 --user_name=openssl \
- --group_number=0 --group_name=openssl \
- --prefix=openssl-$(VERSION) - |\
- gzip --best >../$(TARFILE).gz; \
- rm -f ../$(TARFILE).list; \
- ls -l ../$(TARFILE).gz
-
-tar-snap:
- @$(TAR) $(TARFLAGS) -cvf - \
- `find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
- tardy --user_number=0 --user_name=openssl \
- --group_number=0 --group_name=openssl \
- --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
- ls -l ../$(TARFILE)
-
-dist:
- $(PERL) Configure dist
- @$(MAKE) dist_pem_h
- @$(MAKE) SDIRS='$(SDIRS)' clean
- @$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
-
-dist_pem_h:
- (cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
-
-install: all install_docs install_sw
-
-install_sw:
- @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
- $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/private
- @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
- do \
- (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
- done;
- @set -e; target=install; $(RECURSIVE_BUILD_CMD)
- @set -e; liblist="$(LIBS)"; for i in $$liblist ;\
- do \
- if [ -f "$$i" ]; then \
- ( echo installing $$i; \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
- fi; \
- done;
- @set -e; if [ -n "$(SHARED_LIBS)" ]; then \
- tmp="$(SHARED_LIBS)"; \
- for i in $${tmp:-x}; \
- do \
- if [ -f "$$i" -o -f "$$i.a" ]; then \
- ( echo installing $$i; \
- if [ "$(PLATFORM)" != "Cygwin" ]; then \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
- else \
- c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
- cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
- chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
- fi ); \
- if expr $(PLATFORM) : 'mingw' > /dev/null; then \
- ( case $$i in \
- *crypto*) i=libeay32.dll;; \
- *ssl*) i=ssleay32.dll;; \
- esac; \
- echo installing $$i; \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
- chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
- fi; \
- fi; \
- done; \
- ( here="`pwd`"; \
- cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
- $(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
- if [ "$(INSTALLTOP)" != "/usr" ]; then \
- echo 'OpenSSL shared libraries have been installed in:'; \
- echo ' $(INSTALLTOP)'; \
- echo ''; \
- sed -e '1,/^$$/d' doc/openssl-shared.txt; \
- fi; \
- fi
- cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
- cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
- cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
-
-install_html_docs:
- here="`pwd`"; \
- for subdir in apps crypto ssl; do \
- mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
- for i in doc/$$subdir/*.pod; do \
- fn=`basename $$i .pod`; \
- echo "installing html/$$fn.$(HTMLSUFFIX)"; \
- cat $$i \
- | sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
- | pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
- | sed -r 's/<!DOCTYPE.*//g' \
- > $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
- $(PERL) util/extract-names.pl < $$i | \
- grep -v $$filecase "^$$fn\$$" | \
- (cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
- while read n; do \
- PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
- done); \
- done; \
- done
-
-install_docs:
- @$(PERL) $(TOP)/util/mkdir-p.pl \
- $(INSTALL_PREFIX)$(MANDIR)/man1 \
- $(INSTALL_PREFIX)$(MANDIR)/man3 \
- $(INSTALL_PREFIX)$(MANDIR)/man5 \
- $(INSTALL_PREFIX)$(MANDIR)/man7
- @pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
- here="`pwd`"; \
- filecase=; \
- if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
- filecase=-i; \
- fi; \
- set -e; for i in doc/apps/*.pod; do \
- fn=`basename $$i .pod`; \
- sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
- echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
- (cd `$(PERL) util/dirname.pl $$i`; \
- sh -c "$$pod2man \
- --section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`") \
- > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
- $(PERL) util/extract-names.pl < $$i | \
- (grep -v $$filecase "^$$fn\$$"; true) | \
- (grep -v "[ ]"; true) | \
- (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
- while read n; do \
- PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
- done); \
- done; \
- set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
- fn=`basename $$i .pod`; \
- sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
- echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
- (cd `$(PERL) util/dirname.pl $$i`; \
- sh -c "$$pod2man \
- --section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`") \
- > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
- $(PERL) util/extract-names.pl < $$i | \
- (grep -v $$filecase "^$$fn\$$"; true) | \
- (grep -v "[ ]"; true) | \
- (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
- while read n; do \
- PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
- done); \
- done
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
+++ /dev/null
-### Generated automatically from Makefile.org by Configure.
-
-##
-## Makefile for OpenSSL
-##
-
-VERSION=1.0.1j-dev
-MAJOR=1
-MINOR=0.1
-SHLIB_VERSION_NUMBER=1.0.0
-SHLIB_VERSION_HISTORY=
-SHLIB_MAJOR=1
-SHLIB_MINOR=0.0
-SHLIB_EXT=
-PLATFORM=gcc
-OPTIONS= no-ec_nistp_64_gcc_128 no-gmp no-jpake no-krb5 no-md2 no-rc5 no-rfc3779 no-sctp no-shared no-store no-unit-test no-zlib no-zlib-dynamic static-engine
-CONFIGURE_ARGS=gcc
-SHLIB_TARGET=
-
-# HERE indicates where this Makefile lives. This can be used to indicate
-# where sub-Makefiles are expected to be. Currently has very limited usage,
-# and should probably not be bothered with at all.
-HERE=.
-
-# INSTALL_PREFIX is for package builders so that they can configure
-# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
-# Normally it is left empty.
-INSTALL_PREFIX=
-INSTALLTOP=/usr/local/ssl
-
-# Do not edit this manually. Use Configure --openssldir=DIR do change this!
-OPENSSLDIR=/usr/local/ssl
-
-# NO_IDEA - Define to build without the IDEA algorithm
-# NO_RC4 - Define to build without the RC4 algorithm
-# NO_RC2 - Define to build without the RC2 algorithm
-# THREADS - Define when building with threads, you will probably also need any
-# system defines as well, i.e. _REENTERANT for Solaris 2.[34]
-# TERMIO - Define the termio terminal subsystem, needed if sgtty is missing.
-# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
-# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
-# DEVRANDOM - Give this the value of the 'random device' if your OS supports
-# one. 32 bytes will be read from this when the random
-# number generator is initalised.
-# SSL_FORBID_ENULL - define if you want the server to be not able to use the
-# NULL encryption ciphers.
-#
-# LOCK_DEBUG - turns on lots of lock debug output :-)
-# REF_CHECK - turn on some xyz_free() assertions.
-# REF_PRINT - prints some stuff on structure free.
-# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
-# MFUNC - Make all Malloc/Free/Realloc calls call
-# CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
-# call application defined callbacks via CRYPTO_set_mem_functions()
-# MD5_ASM needs to be defined to use the x86 assembler for MD5
-# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
-# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
-# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8. It must
-# equal 4.
-# PKCS1_CHECK - pkcs1 tests.
-
-CC= gcc
-CFLAG= -O3
-DEPFLAG= -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_STORE -DOPENSSL_NO_UNIT_TEST
-PEX_LIBS=
-EX_LIBS=
-EXE_EXT=
-ARFLAGS=
-AR= ar $(ARFLAGS) r
-RANLIB= /usr/bin/ranlib
-NM= nm
-PERL= /usr/bin/perl
-TAR= tar
-TARFLAGS= --no-recursion --record-size=10240
-MAKEDEPPROG= gcc
-LIBDIR=lib
-
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAG=$(CFLAG)
-
-# For x86 assembler: Set PROCESSOR to 386 if you want to support
-# the 80386.
-PROCESSOR=
-
-# CPUID module collects small commonly used assembler snippets
-CPUID_OBJ= mem_clr.o
-BN_ASM= bn_asm.o
-DES_ENC= des_enc.o fcrypt_b.o
-AES_ENC= aes_core.o aes_cbc.o
-BF_ENC= bf_enc.o
-CAST_ENC= c_enc.o
-RC4_ENC= rc4_enc.o rc4_skey.o
-RC5_ENC= rc5_enc.o
-MD5_ASM_OBJ=
-SHA1_ASM_OBJ=
-RMD160_ASM_OBJ=
-WP_ASM_OBJ= wp_block.o
-CMLL_ENC= camellia.o cmll_misc.o cmll_cbc.o
-MODES_ASM_OBJ=
-ENGINES_ASM_OBJ=
-PERLASM_SCHEME=
-
-# KRB5 stuff
-KRB5_INCLUDES=
-LIBKRB5=
-
-# Zlib stuff
-ZLIB_INCLUDE=
-LIBZLIB=
-
-# TOP level FIPS install directory.
-FIPSDIR=/usr/local/ssl/fips-2.0
-
-# This is the location of fipscanister.o and friends.
-# The FIPS module build will place it $(INSTALLTOP)/lib
-# but since $(INSTALLTOP) can only take the default value
-# when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build may be different so hard
-# code the path.
-
-FIPSLIBDIR=
-
-# The location of the library which contains fipscanister.o
-# normally it will be libcrypto unless fipsdso is set in which
-# case it will be libfips. If not compiling in FIPS mode at all
-# this is empty making it a useful test for a FIPS compile.
-
-FIPSCANLIB=
-
-# Shared library base address. Currently only used on Windows.
-#
-
-BASEADDR=0xFB00000
-
-DIRS= crypto ssl engines apps test tools
-ENGDIRS= ccgost
-SHLIBDIRS= crypto ssl
-
-# dirs in crypto to build
-SDIRS= \
- objects \
- md4 md5 sha mdc2 hmac ripemd whrlpool \
- des aes rc2 rc4 idea bf cast camellia seed modes \
- bn ec rsa dsa ecdsa dh ecdh dso engine \
- buffer bio stack lhash rand err \
- evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
- cms pqueue ts srp cmac
-# keep in mind that the above list is adjusted by ./Configure
-# according to no-xxx arguments...
-
-# tests to perform. "alltests" is a special word indicating that all tests
-# should be performed.
-TESTS = alltests
-
-MAKEFILE= Makefile
-
-MANDIR=$(OPENSSLDIR)/man
-MAN1=1
-MAN3=3
-MANSUFFIX=
-HTMLSUFFIX=html
-HTMLDIR=$(OPENSSLDIR)/html
-SHELL=/bin/sh
-
-TOP= .
-ONEDIRS=out tmp
-EDIRS= times doc bugs util include certs ms shlib mt demos perl sf dep VMS
-WDIRS= windows
-LIBS= libcrypto.a libssl.a
-SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
-SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_LIBS=
-SHARED_LIBS_LINK_EXTS=
-SHARED_LDFLAGS=
-
-GENERAL= Makefile
-BASENAME= openssl
-NAME= $(BASENAME)-$(VERSION)
-TARFILE= $(NAME).tar
-WTARFILE= $(NAME)-win.tar
-EXHEADER= e_os2.h
-HEADER= e_os.h
-
-all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
-
-# as we stick to -e, CLEARENV ensures that local variables in lower
-# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
-# shell, which [annoyingly enough] terminates unset with error if VAR
-# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
-# which terminates unset with error if no variable was present:-(
-CLEARENV= TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS} \
- $${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \
- $${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \
- $${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
- $${EXHEADER+EXHEADER} $${HEADER+HEADER} \
- $${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
- $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
- $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \
- $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
- $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
-
-BUILDENV= PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
- CC='$(CC)' CFLAG='$(CFLAG)' \
- AS='$(CC)' ASFLAG='$(CFLAG) -c' \
- AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \
- CROSS_COMPILE='$(CROSS_COMPILE)' \
- PERL='$(PERL)' ENGDIRS='$(ENGDIRS)' \
- SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)' \
- INSTALL_PREFIX='$(INSTALL_PREFIX)' \
- INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)' \
- LIBDIR='$(LIBDIR)' \
- MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
- DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)' \
- MAKEDEPPROG='$(MAKEDEPPROG)' \
- SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \
- KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)' \
- ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \
- EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
- SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
- PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)' \
- CPUID_OBJ='$(CPUID_OBJ)' \
- BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' \
- AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
- BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \
- RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \
- SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)' \
- MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \
- RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
- WP_ASM_OBJ='$(WP_ASM_OBJ)' \
- MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
- ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)' \
- PERLASM_SCHEME='$(PERLASM_SCHEME)' \
- FIPSLIBDIR='${FIPSLIBDIR}' \
- FIPSDIR='${FIPSDIR}' \
- FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
- THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
-# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
-# which in turn eliminates ambiguities in variable treatment with -e.
-
-# BUILD_CMD is a generic macro to build a given target in a given
-# subdirectory. The target must be given through the shell variable
-# `target' and the subdirectory to build in must be given through `dir'.
-# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
-# BUILD_ONE_CMD instead.
-#
-# BUILD_ONE_CMD is a macro to build a given target in a given
-# subdirectory if that subdirectory is part of $(DIRS). It requires
-# exactly the same shell variables as BUILD_CMD.
-#
-# RECURSIVE_BUILD_CMD is a macro to build a given target in all
-# subdirectories defined in $(DIRS). It requires that the target
-# is given through the shell variable `target'.
-BUILD_CMD= if [ -d "$$dir" ]; then \
- ( cd $$dir && echo "making $$target in $$dir..." && \
- $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
- ) || exit 1; \
- fi
-RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
-BUILD_ONE_CMD=\
- if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
- $(BUILD_CMD); \
- fi
-
-reflect:
- @[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
-
-sub_all: build_all
-build_all: build_libs build_apps build_tests build_tools
-
-build_libs: build_crypto build_ssl build_engines
-
-build_crypto:
- @dir=crypto; target=all; $(BUILD_ONE_CMD)
-build_ssl:
- @dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines:
- @dir=engines; target=all; $(BUILD_ONE_CMD)
-build_apps:
- @dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests:
- @dir=test; target=all; $(BUILD_ONE_CMD)
-build_tools:
- @dir=tools; target=all; $(BUILD_ONE_CMD)
-
-all_testapps: build_libs build_testapps
-build_testapps:
- @dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-
-fips_premain_dso$(EXE_EXT): libcrypto.a
- [ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
- -DFINGERPRINT_PREMAIN_DSO_LOAD -o $@ \
- $(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
- libcrypto.a $(EX_LIBS)
-
-libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
- @if [ "$(SHLIB_TARGET)" != "" ]; then \
- if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
- FIPSLD_LIBCRYPTO=libcrypto.a ; \
- FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
- export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
- fi; \
- $(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared && \
- (touch -c fips_premain_dso$(EXE_EXT) || :); \
- else \
- echo "There's no support for shared libraries on this platform" >&2; \
- exit 1; \
- fi
-
-libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
- @if [ "$(SHLIB_TARGET)" != "" ]; then \
- $(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
- else \
- echo "There's no support for shared libraries on this platform" >&2; \
- exit 1; \
- fi
-
-clean-shared:
- @set -e; for i in $(SHLIBDIRS); do \
- if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
- tmp="$(SHARED_LIBS_LINK_EXTS)"; \
- for j in $${tmp:-x}; do \
- ( set -x; rm -f lib$$i$$j ); \
- done; \
- fi; \
- ( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
- if [ "$(PLATFORM)" = "Cygwin" ]; then \
- ( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
- fi; \
- done
-
-link-shared:
- @ set -e; for i in $(SHLIBDIRS); do \
- $(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
- LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
- LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
- symlink.$(SHLIB_TARGET); \
- libs="$$libs -l$$i"; \
- done
-
-build-shared: do_$(SHLIB_TARGET) link-shared
-
-do_$(SHLIB_TARGET):
- @ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
- if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
- libs="$(LIBKRB5) $$libs"; \
- fi; \
- $(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
- LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
- LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
- LIBDEPS="$$libs $(EX_LIBS)" \
- link_a.$(SHLIB_TARGET); \
- libs="-l$$i $$libs"; \
- done
-
-libcrypto.pc: Makefile
- @ ( echo 'prefix=$(INSTALLTOP)'; \
- echo 'exec_prefix=$${prefix}'; \
- echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
- echo 'includedir=$${prefix}/include'; \
- echo ''; \
- echo 'Name: OpenSSL-libcrypto'; \
- echo 'Description: OpenSSL cryptography library'; \
- echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lcrypto'; \
- echo 'Libs.private: $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
-
-libssl.pc: Makefile
- @ ( echo 'prefix=$(INSTALLTOP)'; \
- echo 'exec_prefix=$${prefix}'; \
- echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
- echo 'includedir=$${prefix}/include'; \
- echo ''; \
- echo 'Name: OpenSSL'; \
- echo 'Description: Secure Sockets Layer and cryptography libraries'; \
- echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
- echo 'Libs.private: $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
-
-openssl.pc: Makefile
- @ ( echo 'prefix=$(INSTALLTOP)'; \
- echo 'exec_prefix=$${prefix}'; \
- echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
- echo 'includedir=$${prefix}/include'; \
- echo ''; \
- echo 'Name: OpenSSL'; \
- echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
- echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
- echo 'Libs.private: $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
-
-Makefile: Makefile.org Configure config
- @echo "Makefile is older than Makefile.org, Configure or config."
- @echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
- @false
-
-libclean:
- rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
-
-clean: libclean
- rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
- @set -e; target=clean; $(RECURSIVE_BUILD_CMD)
- rm -f $(LIBS)
- rm -f openssl.pc libssl.pc libcrypto.pc
- rm -f speed.* .pure
- rm -f $(TARFILE)
- @set -e; for i in $(ONEDIRS) ;\
- do \
- rm -fr $$i/*; \
- done
-
-makefile.one: files
- $(PERL) util/mk1mf.pl >makefile.one; \
- sh util/do_ms.sh
-
-files:
- $(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
- @set -e; target=files; $(RECURSIVE_BUILD_CMD)
-
-links:
- @$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
- @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
- @set -e; target=links; $(RECURSIVE_BUILD_CMD)
-
-gentests:
- @(cd test && echo "generating dummy tests (if needed)..." && \
- $(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
-
-dclean:
- rm -rf *.bak include/openssl certs/.0
- @set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
-
-rehash: rehash.time
-rehash.time: certs apps
- @if [ -z "$(CROSS_COMPILE)" ]; then \
- (OPENSSL="`pwd`/util/opensslwrap.sh"; \
- [ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
- OPENSSL_DEBUG_MEMORY=on; \
- export OPENSSL OPENSSL_DEBUG_MEMORY; \
- $(PERL) tools/c_rehash certs/demo) && \
- touch rehash.time; \
- else :; fi
-
-test: tests
-
-tests: rehash
- @(cd test && echo "testing..." && \
- $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
- OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
-
-report:
- @$(PERL) util/selftest.pl
-
-depend:
- @set -e; target=depend; $(RECURSIVE_BUILD_CMD)
-
-lint:
- @set -e; target=lint; $(RECURSIVE_BUILD_CMD)
-
-tags:
- rm -f TAGS
- find . -name '[^.]*.[ch]' | xargs etags -a
-
-errors:
- $(PERL) util/ck_errf.pl -strict */*.c */*/*.c
- $(PERL) util/mkerr.pl -recurse -write
- (cd engines; $(MAKE) PERL=$(PERL) errors)
-
-stacks:
- $(PERL) util/mkstack.pl -write
-
-util/libeay.num::
- $(PERL) util/mkdef.pl crypto update
-
-util/ssleay.num::
- $(PERL) util/mkdef.pl ssl update
-
-crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
- $(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
-crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
- $(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
-crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
- $(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
-
-apps/openssl-vms.cnf: apps/openssl.cnf
- $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
-
-crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
- $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
-
-
-TABLE: Configure
- (echo 'Output of `Configure TABLE'"':"; \
- $(PERL) Configure TABLE) > TABLE
-
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
-
-# Build distribution tar-file. As the list of files returned by "find" is
-# pretty long, on several platforms a "too many arguments" error or similar
-# would occur. Therefore the list of files is temporarily stored into a file
-# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
-# tar does not support the --files-from option.
-tar:
- find . -type d -print | xargs chmod 755
- find . -type f -print | xargs chmod a+r
- find . -type f -perm -0100 -print | xargs chmod a+x
- find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
- $(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
- tardy --user_number=0 --user_name=openssl \
- --group_number=0 --group_name=openssl \
- --prefix=openssl-$(VERSION) - |\
- gzip --best >../$(TARFILE).gz; \
- rm -f ../$(TARFILE).list; \
- ls -l ../$(TARFILE).gz
-
-tar-snap:
- @$(TAR) $(TARFLAGS) -cvf - \
- `find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
- tardy --user_number=0 --user_name=openssl \
- --group_number=0 --group_name=openssl \
- --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
- ls -l ../$(TARFILE)
-
-dist:
- $(PERL) Configure dist
- @$(MAKE) dist_pem_h
- @$(MAKE) SDIRS='$(SDIRS)' clean
- @$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
-
-dist_pem_h:
- (cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
-
-install: all install_docs install_sw
-
-install_sw:
- @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
- $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/private
- @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
- do \
- (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
- done;
- @set -e; target=install; $(RECURSIVE_BUILD_CMD)
- @set -e; liblist="$(LIBS)"; for i in $$liblist ;\
- do \
- if [ -f "$$i" ]; then \
- ( echo installing $$i; \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
- fi; \
- done;
- @set -e; if [ -n "$(SHARED_LIBS)" ]; then \
- tmp="$(SHARED_LIBS)"; \
- for i in $${tmp:-x}; \
- do \
- if [ -f "$$i" -o -f "$$i.a" ]; then \
- ( echo installing $$i; \
- if [ "$(PLATFORM)" != "Cygwin" ]; then \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
- else \
- c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
- cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
- chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
- fi ); \
- if expr $(PLATFORM) : 'mingw' > /dev/null; then \
- ( case $$i in \
- *crypto*) i=libeay32.dll;; \
- *ssl*) i=ssleay32.dll;; \
- esac; \
- echo installing $$i; \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
- chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
- fi; \
- fi; \
- done; \
- ( here="`pwd`"; \
- cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
- $(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
- if [ "$(INSTALLTOP)" != "/usr" ]; then \
- echo 'OpenSSL shared libraries have been installed in:'; \
- echo ' $(INSTALLTOP)'; \
- echo ''; \
- sed -e '1,/^$$/d' doc/openssl-shared.txt; \
- fi; \
- fi
- cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
- cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
- cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
-
-install_html_docs:
- here="`pwd`"; \
- for subdir in apps crypto ssl; do \
- mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
- for i in doc/$$subdir/*.pod; do \
- fn=`basename $$i .pod`; \
- echo "installing html/$$fn.$(HTMLSUFFIX)"; \
- cat $$i \
- | sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
- | pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
- | sed -r 's/<!DOCTYPE.*//g' \
- > $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
- $(PERL) util/extract-names.pl < $$i | \
- grep -v $$filecase "^$$fn\$$" | \
- (cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
- while read n; do \
- PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
- done); \
- done; \
- done
-
-install_docs:
- @$(PERL) $(TOP)/util/mkdir-p.pl \
- $(INSTALL_PREFIX)$(MANDIR)/man1 \
- $(INSTALL_PREFIX)$(MANDIR)/man3 \
- $(INSTALL_PREFIX)$(MANDIR)/man5 \
- $(INSTALL_PREFIX)$(MANDIR)/man7
- @pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
- here="`pwd`"; \
- filecase=; \
- if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
- filecase=-i; \
- fi; \
- set -e; for i in doc/apps/*.pod; do \
- fn=`basename $$i .pod`; \
- sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
- echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
- (cd `$(PERL) util/dirname.pl $$i`; \
- sh -c "$$pod2man \
- --section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`") \
- > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
- $(PERL) util/extract-names.pl < $$i | \
- (grep -v $$filecase "^$$fn\$$"; true) | \
- (grep -v "[ ]"; true) | \
- (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
- while read n; do \
- PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
- done); \
- done; \
- set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
- fn=`basename $$i .pod`; \
- sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
- echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
- (cd `$(PERL) util/dirname.pl $$i`; \
- sh -c "$$pod2man \
- --section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`") \
- > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
- $(PERL) util/extract-names.pl < $$i | \
- (grep -v $$filecase "^$$fn\$$"; true) | \
- (grep -v "[ ]"; true) | \
- (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
- while read n; do \
- PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
- done); \
- done
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
+++ /dev/null
-/* opensslconf.h */
-/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-/* OpenSSL was configured with the following options: */
-#ifndef OPENSSL_DOING_MAKEDEPEND
-
-
-#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
-# define OPENSSL_NO_EC_NISTP_64_GCC_128
-#endif
-#ifndef OPENSSL_NO_GMP
-# define OPENSSL_NO_GMP
-#endif
-#ifndef OPENSSL_NO_JPAKE
-# define OPENSSL_NO_JPAKE
-#endif
-#ifndef OPENSSL_NO_KRB5
-# define OPENSSL_NO_KRB5
-#endif
-#ifndef OPENSSL_NO_MD2
-# define OPENSSL_NO_MD2
-#endif
-#ifndef OPENSSL_NO_RC5
-# define OPENSSL_NO_RC5
-#endif
-#ifndef OPENSSL_NO_RFC3779
-# define OPENSSL_NO_RFC3779
-#endif
-#ifndef OPENSSL_NO_SCTP
-# define OPENSSL_NO_SCTP
-#endif
-#ifndef OPENSSL_NO_STORE
-# define OPENSSL_NO_STORE
-#endif
-#ifndef OPENSSL_NO_UNIT_TEST
-# define OPENSSL_NO_UNIT_TEST
-#endif
-
-#endif /* OPENSSL_DOING_MAKEDEPEND */
-
-#ifndef OPENSSL_NO_DYNAMIC_ENGINE
-# define OPENSSL_NO_DYNAMIC_ENGINE
-#endif
-
-/* The OPENSSL_NO_* macros are also defined as NO_* if the application
- asks for it. This is a transient feature that is provided for those
- who haven't had the time to do the appropriate changes in their
- applications. */
-#ifdef OPENSSL_ALGORITHM_DEFINES
-# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128)
-# define NO_EC_NISTP_64_GCC_128
-# endif
-# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
-# define NO_GMP
-# endif
-# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
-# define NO_JPAKE
-# endif
-# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
-# define NO_KRB5
-# endif
-# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
-# define NO_MD2
-# endif
-# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
-# define NO_RC5
-# endif
-# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
-# define NO_RFC3779
-# endif
-# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP)
-# define NO_SCTP
-# endif
-# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE)
-# define NO_STORE
-# endif
-# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST)
-# define NO_UNIT_TEST
-# endif
-#endif
-
-/* crypto/opensslconf.h.in */
-
-/* Generate 80386 code? */
-#undef I386_ONLY
-
-#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
-#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
-#define ENGINESDIR "/usr/local/ssl/lib/engines"
-#define OPENSSLDIR "/usr/local/ssl"
-#endif
-#endif
-
-#undef OPENSSL_UNISTD
-#define OPENSSL_UNISTD <unistd.h>
-
-#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
-#define IDEA_INT unsigned int
-#endif
-
-#if defined(HEADER_MD2_H) && !defined(MD2_INT)
-#define MD2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC2_H) && !defined(RC2_INT)
-/* I need to put in a mod for the alpha - eay */
-#define RC2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC4_H)
-#if !defined(RC4_INT)
-/* using int types make the structure larger but make the code faster
- * on most boxes I have tested - up to %20 faster. */
-/*
- * I don't know what does "most" mean, but declaring "int" is a must on:
- * - Intel P6 because partial register stalls are very expensive;
- * - elder Alpha because it lacks byte load/store instructions;
- */
-#define RC4_INT unsigned int
-#endif
-#if !defined(RC4_CHUNK)
-/*
- * This enables code handling data aligned at natural CPU word
- * boundary. See crypto/rc4/rc4_enc.c for further details.
- */
-#undef RC4_CHUNK
-#endif
-#endif
-
-#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
-/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
- * %20 speed up (longs are 8 bytes, int's are 4). */
-#ifndef DES_LONG
-#define DES_LONG unsigned long
-#endif
-#endif
-
-#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
-#define CONFIG_HEADER_BN_H
-#undef BN_LLONG
-
-/* Should we define BN_DIV2W here? */
-
-/* Only one for the following should be defined */
-#undef SIXTY_FOUR_BIT_LONG
-#undef SIXTY_FOUR_BIT
-#define THIRTY_TWO_BIT
-#endif
-
-#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
-#define CONFIG_HEADER_RC4_LOCL_H
-/* if this is defined data[i] is used instead of *data, this is a %20
- * speedup on x86 */
-#undef RC4_INDEX
-#endif
-
-#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
-#define CONFIG_HEADER_BF_LOCL_H
-#undef BF_PTR
-#endif /* HEADER_BF_LOCL_H */
-
-#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
-#define CONFIG_HEADER_DES_LOCL_H
-#ifndef DES_DEFAULT_OPTIONS
-/* the following is tweaked from a config script, that is why it is a
- * protected undef/define */
-#ifndef DES_PTR
-#undef DES_PTR
-#endif
-
-/* This helps C compiler generate the correct code for multiple functional
- * units. It reduces register dependancies at the expense of 2 more
- * registers */
-#ifndef DES_RISC1
-#undef DES_RISC1
-#endif
-
-#ifndef DES_RISC2
-#undef DES_RISC2
-#endif
-
-#if defined(DES_RISC1) && defined(DES_RISC2)
-YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
-#endif
-
-/* Unroll the inner loop, this sometimes helps, sometimes hinders.
- * Very mucy CPU dependant */
-#ifndef DES_UNROLL
-#undef DES_UNROLL
-#endif
-
-/* These default values were supplied by
- * Peter Gutman <pgut001@cs.auckland.ac.nz>
- * They are only used if nothing else has been defined */
-#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
-/* Special defines which change the way the code is built depending on the
- CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
- even newer MIPS CPU's, but at the moment one size fits all for
- optimization options. Older Sparc's work better with only UNROLL, but
- there's no way to tell at compile time what it is you're running on */
-
-#if defined( sun ) /* Newer Sparc's */
-# define DES_PTR
-# define DES_RISC1
-# define DES_UNROLL
-#elif defined( __ultrix ) /* Older MIPS */
-# define DES_PTR
-# define DES_RISC2
-# define DES_UNROLL
-#elif defined( __osf1__ ) /* Alpha */
-# define DES_PTR
-# define DES_RISC2
-#elif defined ( _AIX ) /* RS6000 */
- /* Unknown */
-#elif defined( __hpux ) /* HP-PA */
- /* Unknown */
-#elif defined( __aux ) /* 68K */
- /* Unknown */
-#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */
-# define DES_UNROLL
-#elif defined( __sgi ) /* Newer MIPS */
-# define DES_PTR
-# define DES_RISC2
-# define DES_UNROLL
-#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */
-# define DES_PTR
-# define DES_RISC1
-# define DES_UNROLL
-#endif /* Systems-specific speed defines */
-#endif
-
-#endif /* DES_DEFAULT_OPTIONS */
-#endif /* HEADER_DES_LOCL_H */
-#ifdef __cplusplus
-}
-#endif
projects / cassiopeia.git / commitdiff