+++ /dev/null
-$!
-$! MAKEENGINES.COM
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$! This command file compiles and creates the various engines in form
-$! of shared images. They are placed in [.xxx.EXE.ENGINES], where "xxx"
-$! is ALPHA, IA64 or VAX, depending on your hardware.
-$!
-$! P1 if this is ENGINES or ALL, the engines will build, otherwise not.
-$!
-$! P2 DEBUG or NODEBUG to compile with or without debugger information.
-$!
-$! P3 VAXC for VAX C
-$! DECC for DEC C
-$! GNUC for GNU C (untested)
-$!
-$! P4 if defined, sets the TCP/IP libraries to use. UCX or TCPIP is
-$! used by default since most other implementations come with a
-$! compatibility library. The value must be one of the following:
-$!
-$! UCX for UCX
-$! SOCKETSHR for SOCKETSHR+NETLIB
-$! TCPIP for TCPIP (post UCX)
-$!
-$! P5 if defined, tells the compiler not to use special threads.
-$!
-$! P6 if defined, denotes which engines to build. If not defined,
-$! all available engines are built.
-$!
-$! P7, if defined, specifies the C pointer size. Ignored on VAX.
-$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
-$! Supported values are:
-$!
-$! "" Compile with default (/NOPOINTER_SIZE)
-$! 32 Compile with /POINTER_SIZE=32 (SHORT)
-$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV])
-$! (Automatically select ARGV if compiler supports it.)
-$! 64= Compile with /POINTER_SIZE=64 (LONG).
-$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
-$!
-$! P8, if defined, specifies a directory where ZLIB files (zlib.h,
-$! libz.olb) may be found. Optionally, a non-default object library
-$! name may be included ("dev:[dir]libz_64.olb", for example).
-$!
-$!-----------------------------------------------------------------------------
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
- f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$ on control_c then goto exit
-$!
-$! Set the default TCP/IP library to link against if needed
-$!
-$ TCPIP_LIB = ""
-$ ZLIB_LIB = ""
-$!
-$! Check What Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$! The Architecture Is VAX.
-$!
-$ ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$ ARCHD = ARCH
-$ LIB32 = "32"
-$ OPT_FILE = ""
-$ POINTER_SIZE = ""
-$!
-$! Set the names of the engines we want to build
-$! NOTE: Some might think this list ugly. However, it's made this way to
-$! reflect the LIBNAMES variable in Makefile as closely as possible,
-$! thereby making it fairly easy to verify that the lists are the same.
-$! NOTE: gmp isn't built, as it's mostly a test engine and brings in another
-$! library that isn't necessarely ported to VMS.
-$!
-$ ENGINES = "," + P6
-$ IF ENGINES .EQS. "," THEN -
- ENGINES = ",4758cca,aep,atalla,cswift,chil,nuron,sureware,ubsec,padlock,"
-$!
-$! GOST requires a 64-bit integer type, unavailable on VAX.
-$!
-$ IF (ARCH .NES. "VAX") THEN -
- ENGINES = ENGINES+ ",ccgost"
-$!
-$! Check options.
-$!
-$ OPT_PHASE = P1
-$ ACCEPT_PHASE = "ALL,ENGINES"
-$ OPT_DEBUG = P2
-$ OPT_COMPILER = P3
-$ OPT_TCPIP_LIB = P4
-$ OPT_SPECIAL_THREADS = P5
-$ OPT_POINTER_SIZE = P7
-$ ZLIB = P8
-$
-$ GOSUB CHECK_OPTIONS
-$!
-$! Set the goal directories, and create them if necessary
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.ENGINES]
-$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.ENGINES]
-$ IF F$PARSE(OBJ_DIR) .EQS. "" THEN CREATE/DIRECTORY 'OBJ_DIR'
-$ IF F$PARSE(EXE_DIR) .EQS. "" THEN CREATE/DIRECTORY 'EXE_DIR'
-$!
-$! Set the goal files, and create them if necessary
-$!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB
-$ IF F$SEARCH(CRYPTO_LIB) .EQS. "" THEN LIBRARY/CREATE/OBJECT 'CRYPTO_LIB'
-$!
-$! Specify the destination directory in any /MAP option.
-$!
-$ if (LINKMAP .eqs. "MAP")
-$ then
-$ LINKMAP = LINKMAP+ "=''EXE_DIR'"
-$ endif
-$!
-$! Add the location prefix to the linker options file name.
-$!
-$ if (OPT_FILE .nes. "")
-$ then
-$ OPT_FILE = EXE_DIR+ OPT_FILE
-$ endif
-$!
-$! Initialise.
-$!
-$ GOSUB INITIALISE
-$ GOSUB CHECK_OPT_FILE
-$!
-$! Define what goes into each engine. VAX includes a transfer vector.
-$!
-$ ENGINE_ = ""
-$ TV_OBJ = ""
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ ENGINE_ = "engine_vector.mar"
-$ TV_OBJ_NAME = OBJ_DIR + F$PARSE(ENGINE_,,,"NAME","SYNTAX_ONLY") + ".OBJ"
-$ TV_OBJ = ",''TV_OBJ_NAME'"
-$ ENDIF
-$ ENGINE_4758cca = "e_4758cca"
-$ ENGINE_aep = "e_aep"
-$ ENGINE_atalla = "e_atalla"
-$ ENGINE_cswift = "e_cswift"
-$ ENGINE_chil = "e_chil"
-$ ENGINE_nuron = "e_nuron"
-$ ENGINE_sureware = "e_sureware"
-$ ENGINE_ubsec = "e_ubsec"
-$ ENGINE_padlock = "e_padlock"
-$
-$ ENGINE_ccgost_SUBDIR = "ccgost"
-$ ENGINE_ccgost = "e_gost_err,gost2001_keyx,gost2001,gost89,gost94_keyx,"+ -
- "gost_ameth,gost_asn1,gost_crypt,gost_ctl,gost_eng,"+ -
- "gosthash,gost_keywrap,gost_md,gost_params,gost_pmeth,"+ -
- "gost_sign"
-$!
-$! Define which programs need to be linked with a TCP/IP library
-$!
-$ TCPIP_ENGINES = ",,"
-$ IF COMPILER .EQS. "VAXC" THEN -
- TCPIP_ENGINES = ",,"
-$!
-$! Set up two loops, one that keeps track of the engines,
-$! and one that keeps track of all the files going into
-$! the current engine.
-$!
-$! Here's the start of the engine loop.
-$!
-$ ENGINE_COUNTER = 0
-$ ENGINE_NEXT:
-$!
-$! Extract the current engine name, and if we've reached the end, stop
-$!
-$ ENGINE_NAME = F$ELEMENT(ENGINE_COUNTER,",",ENGINES)
-$ IF (ENGINE_NAME.EQS.",") THEN GOTO ENGINE_DONE
-$!
-$ ENGINE_COUNTER = ENGINE_COUNTER + 1
-$!
-$! Set up the engine library names.
-$!
-$ LIB_ENGINE = "ENGINE_" + ENGINE_NAME
-$!
-$! Check if the library module name actually is defined
-$!
-$ IF F$TYPE('LIB_ENGINE') .EQS. ""
-$ THEN
-$ WRITE SYS$ERROR ""
-$ WRITE SYS$ERROR "The module ",ENGINE_NAME," does not exist. Continuing..."
-$ WRITE SYS$ERROR ""
-$ GOTO ENGINE_NEXT
-$ ENDIF
-$!
-$! Talk to the user
-$!
-$ IF ENGINE_NAME .NES. ""
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",ENGINE_NAME," Library Files. (",BUILDALL,")"
-$ ELSE
-$ WRITE SYS$OUTPUT "Compiling Support Files. (",BUILDALL,")"
-$ ENDIF
-$!
-$! Create a .OPT file for the object files (for a real engine name).
-$!
-$ IF ENGINE_NAME .NES. ""
-$ THEN
-$ OPEN /WRITE OBJECTS 'EXE_DIR''ENGINE_NAME'.OPT
-$ ENDIF
-$!
-$! Here's the start of per-engine module loop.
-$!
-$ FILE_COUNTER = 0
-$ FILE_NEXT:
-$!
-$! Extract the file name from the file list, and if we've reached the end, stop
-$!
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_ENGINE')
-$ IF (FILE_NAME.EQS.",") THEN GOTO FILE_DONE
-$!
-$ FILE_COUNTER = FILE_COUNTER + 1
-$!
-$ IF FILE_NAME .EQS. "" THEN GOTO FILE_NEXT
-$!
-$! Set up the source and object reference
-$!
-$ IF F$TYPE('LIB_ENGINE'_SUBDIR) .EQS. ""
-$ THEN
-$ SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[].C",,,"SYNTAX_ONLY")
-$ ELSE
-$ SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[."+'LIB_ENGINE'_SUBDIR+"].C",,,"SYNTAX_ONLY")
-$ ENDIF
-$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"
-$!
-$! If we get some problem, we just go on trying to build the next module.
-$ ON WARNING THEN GOTO FILE_NEXT
-$!
-$! Check if the module we want to compile is actually there.
-$!
-$ IF F$SEARCH(SOURCE_FILE) .EQS. ""
-$ THEN
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
-$ WRITE SYS$OUTPUT ""
-$ GOTO EXIT
-$ ENDIF
-$!
-$! Talk to the user.
-$!
-$ WRITE SYS$OUTPUT " ",FILE_NAME,""
-$!
-$! Do the dirty work.
-$!
-$ ON ERROR THEN GOTO FILE_NEXT
-$ IF F$EDIT(F$PARSE(SOURCE_FILE,,,"TYPE","SYNTAX_ONLY"),"UPCASE") .EQS. ".MAR"
-$ THEN
-$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ENDIF
-$!
-$! Write the entry to the .OPT file (for a real engine name).
-$!
-$ IF ENGINE_NAME .NES. ""
-$ THEN
-$ WRITE OBJECTS OBJECT_FILE
-$ ENDIF
-$!
-$! Next file
-$!
-$ GOTO FILE_NEXT
-$!
-$ FILE_DONE:
-$!
-$! Do not link the support files.
-$!
-$ IF ENGINE_NAME .EQS. "" THEN GOTO ENGINE_NEXT
-$!
-$! Close the linker options file (for a real engine name).
-$!
-$ CLOSE OBJECTS
-$!
-$! Now, there are two ways to handle this. We can either build
-$! shareable images or stick the engine object file into libcrypto.
-$! For now, the latter is NOT supported.
-$!
-$!!!!! LIBRARY/REPLACE 'CRYPTO_LIB' 'OBJECT_FILE'
-$!
-$! For shareable libraries, we need to do things a little differently
-$! depending on if we link with a TCP/IP library or not.
-$!
-$ ENGINE_OPT := SYS$DISK:[]'ARCH'.OPT
-$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
- 'EXE_DIR''ENGINE_NAME'.OPT /OPTIONS -
- 'TV_OBJ', -
- 'CRYPTO_LIB' /LIBRARY, -
- 'ENGINE_OPT' /OPTIONS -
- 'TCPIP_LIB' -
- 'ZLIB_LIB' -
- ,'OPT_FILE' /OPTIONS
-$!
-$! Next engine
-$!
-$ GOTO ENGINE_NEXT
-$!
-$ ENGINE_DONE:
-$!
-$! Talk to the user
-$!
-$ WRITE SYS$OUTPUT "All Done..."
-$ EXIT:
-$ GOSUB CLEANUP
-$ EXIT
-$!
-$! Check For The Link Option FIle.
-$!
-$ CHECK_OPT_FILE:
-$!
-$! Check To See If We Need To Make A VAX C Option File.
-$!
-$ IF (COMPILER.EQS."VAXC")
-$ THEN
-$!
-$! Check To See If We Already Have A VAX C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A VAX C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against
-! The Sharable VAX C Runtime Library.
-!
-SYS$SHARE:VAXCRTL.EXE/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The VAXC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A GNU C Option File.
-$!
-$ IF (COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If We Already Have A GNU C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A GNU C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against
-! The Sharable C Runtime Library.
-!
-GNU_CC:[000000]GCCLIB/LIBRARY
-SYS$SHARE:VAXCRTL/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A DEC C Option File.
-$!
-$ IF (COMPILER.EQS."DECC")
-$ THEN
-$!
-$! Check To See If We Already Have A DEC C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! Figure Out If We Need A non-VAX Or A VAX Linker Option File.
-$!
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$!
-$! We Need A DEC C Linker Option File For VAX.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against
-! The Sharable DEC C Runtime Library.
-!
-SYS$SHARE:DECC$SHR.EXE/SHARE
-$EOD
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Create The non-VAX Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File For non-VAX To Link Against
-! The Sharable C Runtime Library.
-!
-SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
-SYS$SHARE:CMA$OPEN_RTL/SHARE
-$EOD
-$!
-$! End The DEC C Option File Check.
-$!
-$ ENDIF
-$!
-$! End The Option File Search.
-$!
-$ ENDIF
-$!
-$! End The DEC C Check.
-$!
-$ ENDIF
-$!
-$! Tell The User What Linker Option File We Are Using.
-$!
-$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check To See If OPT_PHASE Is Blank.
-$!
-$ IF (OPT_PHASE.EQS."ALL")
-$ THEN
-$!
-$! OPT_PHASE Is Blank, So Build Everything.
-$!
-$ BUILDALL = "ALL"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Else, Check To See If OPT_PHASE Has A Valid Argument.
-$!
-$ IF ("," + ACCEPT_PHASE + ",") - ("," + OPT_PHASE + ",") -
- .NES. ("," + ACCEPT_PHASE + ",")
-$ THEN
-$!
-$! A Valid Argument.
-$!
-$ BUILDALL = OPT_PHASE
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The option ",OPT_PHASE," is invalid. The valid options are:"
-$ WRITE SYS$OUTPUT ""
-$ IF ("," + ACCEPT_PHASE + ",") - ",ALL," -
- .NES. ("," + ACCEPT_PHASE + ",") THEN -
- WRITE SYS$OUTPUT " ALL : just build everything."
-$ IF ("," + ACCEPT_PHASE + ",") - ",ENGINES," -
- .NES. ("," + ACCEPT_PHASE + ",") THEN -
- WRITE SYS$OUTPUT " ENGINES : to compile just the [.xxx.EXE.ENGINES]*.EXE hareable images."
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " where 'xxx' stands for:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALPHA[64]: Alpha architecture."
-$ WRITE SYS$OUTPUT " IA64[64] : IA64 architecture."
-$ WRITE SYS$OUTPUT " VAX : VAX architecture."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The OPT_PHASE Check.
-$!
-$ ENDIF
-$!
-$! Check To See If OPT_DEBUG Is Blank.
-$!
-$ IF (OPT_DEBUG.EQS."NODEBUG")
-$ THEN
-$!
-$! OPT_DEBUG Is NODEBUG, So Compile Without The Debugger Information.
-$!
-$ DEBUGGER = "NODEBUG"
-$ LINKMAP = "NOMAP"
-$ TRACEBACK = "NOTRACEBACK"
-$ GCC_OPTIMIZE = "OPTIMIZE"
-$ CC_OPTIMIZE = "OPTIMIZE"
-$ MACRO_OPTIMIZE = "OPTIMIZE"
-$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
-$ ELSE
-$!
-$! Check To See If We Are To Compile With Debugger Information.
-$!
-$ IF (OPT_DEBUG.EQS."DEBUG")
-$ THEN
-$!
-$! Compile With Debugger Information.
-$!
-$ DEBUGGER = "DEBUG"
-$ LINKMAP = "MAP"
-$ TRACEBACK = "TRACEBACK"
-$ GCC_OPTIMIZE = "NOOPTIMIZE"
-$ CC_OPTIMIZE = "NOOPTIMIZE"
-$ MACRO_OPTIMIZE = "NOOPTIMIZE"
-$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
-$ ELSE
-$!
-$! They Entered An Invalid Option.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",OPT_DEBUG," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
-$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The OPT_DEBUG Check.
-$!
-$ ENDIF
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For OPT_SPECIAL_THREADS.
-$!
-$ IF (OPT_SPECIAL_THREADS.EQS."")
-$ THEN
-$!
-$! Get The Version Of VMS We Are Using.
-$!
-$ ISSEVEN :=
-$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
-$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$! Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$ IF (TMP.GE.71)
-$ THEN
-$!
-$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$ ISSEVEN := ,PTHREAD_USE_D4
-$!
-$! End The VMS Version Check.
-$!
-$ ENDIF
-$!
-$! End The OPT_SPECIAL_THREADS Check.
-$!
-$ ENDIF
-$!
-$! Check OPT_POINTER_SIZE (P7).
-$!
-$ IF (OPT_POINTER_SIZE .NES. "") .AND. (ARCH .NES. "VAX")
-$ THEN
-$!
-$ IF (OPT_POINTER_SIZE .EQS. "32")
-$ THEN
-$ POINTER_SIZE = " /POINTER_SIZE=32"
-$ ELSE
-$ POINTER_SIZE = F$EDIT( OPT_POINTER_SIZE, "COLLAPSE, UPCASE")
-$ IF ((POINTER_SIZE .EQS. "64") .OR. -
- (POINTER_SIZE .EQS. "64=") .OR. -
- (POINTER_SIZE .EQS. "64=ARGV"))
-$ THEN
-$ ARCHD = ARCH+ "_64"
-$ LIB32 = ""
-$ POINTER_SIZE = " /POINTER_SIZE=64"
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", OPT_POINTER_SIZE, -
- " Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT -
- " """" : Compile with default (short) pointers."
-$ WRITE SYS$OUTPUT -
- " 32 : Compile with 32-bit (short) pointers."
-$ WRITE SYS$OUTPUT -
- " 64 : Compile with 64-bit (long) pointers (auto ARGV)."
-$ WRITE SYS$OUTPUT -
- " 64= : Compile with 64-bit (long) pointers (no ARGV)."
-$ WRITE SYS$OUTPUT -
- " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$ ENDIF
-$!
-$ ENDIF
-$!
-$! End The OPT_POINTER_SIZE Check.
-$!
-$ ENDIF
-$!
-$! Set basic C compiler /INCLUDE directories.
-$!
-$ CC_INCLUDES = "SYS$DISK:[],SYS$DISK:[.VENDOR_DEFNS]"
-$!
-$! Check To See If OPT_COMPILER Is Blank.
-$!
-$ IF (OPT_COMPILER.EQS."")
-$ THEN
-$!
-$! O.K., The User Didn't Specify A Compiler, Let's Try To
-$! Find Out Which One To Use.
-$!
-$! Check To See If We Have GNU C.
-$!
-$ IF (F$TRNLNM("GNU_CC").NES."")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ OPT_COMPILER = "GNUC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Have VAXC Or DECC.
-$!
-$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ OPT_COMPILER = "DECC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ OPT_COMPILER = "VAXC"
-$!
-$! End The VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The DECC & VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The Compiler Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have A Option For OPT_TCPIP_LIB.
-$!
-$ IF (OPT_TCPIP_LIB.EQS."")
-$ THEN
-$!
-$! Find out what socket library we have available
-$!
-$ IF F$PARSE("SOCKETSHR:") .NES. ""
-$ THEN
-$!
-$! We have SOCKETSHR, and it is my opinion that it's the best to use.
-$!
-$ OPT_TCPIP_LIB = "SOCKETSHR"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$! Else, let's look for something else
-$!
-$ ELSE
-$!
-$! Like UCX (the reason to do this before Multinet is that the UCX
-$! emulation is easier to use...)
-$!
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
- .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
- .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
-$ THEN
-$!
-$! Last resort: a UCX or UCX-compatible library
-$!
-$ OPT_TCPIP_LIB = "UCX"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$! That was all...
-$!
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Set Up Initial CC Definitions, Possibly With User Ones
-$!
-$ CCDEFS = "TCPIP_TYPE_''OPT_TCPIP_LIB',DSO_VMS"
-$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
-$ CCEXTRAFLAGS = ""
-$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "" !!! "MAYLOSEDATA3" !!! "LONGLONGTYPE,LONGLONGSUFX"
-$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. ""
-$ THEN
-$ IF CCDISABLEWARNINGS .NES. "" THEN CCDISABLEWARNINGS = CCDISABLEWARNINGS + ","
-$ CCDISABLEWARNINGS = CCDISABLEWARNINGS + USER_CCDISABLEWARNINGS
-$ ENDIF
-$!
-$! Check To See If We Have A ZLIB Option.
-$!
-$ IF (ZLIB .NES. "")
-$ THEN
-$!
-$! Check for expected ZLIB files.
-$!
-$ err = 0
-$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
-$ if (f$search( file1) .eqs. "")
-$ then
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$ WRITE SYS$OUTPUT " Can't find header: ''file1'"
-$ err = 1
-$ endif
-$ file1 = f$parse( "A.;", ZLIB)- "A.;"
-$!
-$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
-$ if (f$search( file2) .eqs. "")
-$ then
-$ if (err .eq. 0)
-$ then
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$ endif
-$ WRITE SYS$OUTPUT " Can't find library: ''file2'"
-$ WRITE SYS$OUTPUT ""
-$ err = err+ 2
-$ endif
-$ if (err .eq. 1)
-$ then
-$ WRITE SYS$OUTPUT ""
-$ endif
-$!
-$ if (err .ne. 0)
-$ then
-$ EXIT
-$ endif
-$!
-$ CCDEFS = """ZLIB=1"", "+ CCDEFS
-$ CC_INCLUDES = CC_INCLUDES+ ", "+ file1
-$ ZLIB_LIB = ", ''file2' /library"
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2
-$!
-$! End The ZLIB Check.
-$!
-$ ENDIF
-$!
-$! Check To See If The User Entered A Valid Parameter.
-$!
-$ IF (OPT_COMPILER.EQS."VAXC").OR.(OPT_COMPILER.EQS."DECC").OR.(OPT_COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If The User Wanted DECC.
-$!
-$ IF (OPT_COMPILER.EQS."DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! Use DECC...
-$!
-$ CC = "CC"
-$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
- THEN CC = "CC/DECC"
-$ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
- "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
- " /INCLUDE=(''CC_INCLUDES') " + -
- CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "VAX_DECC_OPTIONS.OPT"
-$!
-$! End DECC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use VAXC.
-$!
-$ IF (OPT_COMPILER.EQS."VAXC")
-$ THEN
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$!
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! Compile Using VAXC.
-$!
-$ CC = "CC"
-$ IF ARCH.NES."VAX"
-$ THEN
-$ WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
-$ EXIT
-$ ENDIF
-$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(''CC_INCLUDES')" + -
- CCEXTRAFLAGS
-$ CCDEFS = """VAXC""," + CCDEFS
-$!
-$! Define <sys> As SYS$COMMON:[SYSLIB]
-$!
-$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "VAX_VAXC_OPTIONS.OPT"
-$!
-$! End VAXC Check
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use GNU C.
-$!
-$ IF (OPT_COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! Use GNU C...
-$!
-$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(''CC_INCLUDES')" + -
- CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "VAX_GNUC_OPTIONS.OPT"
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Set up default defines
-$!
-$ CCDEFS = """FLAT_INC=1""," + CCDEFS
-$!
-$! Finish up the definition of CC.
-$!
-$ IF COMPILER .EQS. "DECC"
-$ THEN
-$! Not all compiler versions support MAYLOSEDATA3.
-$ OPT_TEST = "MAYLOSEDATA3"
-$ DEFINE /USER_MODE SYS$ERROR NL:
-$ DEFINE /USER_MODE SYS$OUTPUT NL:
-$ 'CC' /NOCROSS_REFERENCE /NOLIST /NOOBJECT -
- /WARNINGS = DISABLE = ('OPT_TEST', EMPTYFILE) NL:
-$ IF ($SEVERITY)
-$ THEN
-$ IF CCDISABLEWARNINGS .NES. "" THEN -
- CCDISABLEWARNINGS = CCDISABLEWARNINGS+ ","
-$ CCDISABLEWARNINGS = CCDISABLEWARNINGS+ OPT_TEST
-$ ENDIF
-$ IF CCDISABLEWARNINGS .NES. ""
-$ THEN
-$ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
-$ ENDIF
-$ ELSE
-$ CCDISABLEWARNINGS = ""
-$ ENDIF
-$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
-$!
-$! Show user the result
-$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",OPT_COMPILER," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
-$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
-$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! Build a MACRO command for the architecture at hand
-$!
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ MACRO = "MACRO/''DEBUGGER'"
-$ ELSE
-$ MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
-$ ENDIF
-$!
-$! Show user the result
-$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
-$!
-$! Time to check the contents, and to make sure we get the correct library.
-$!
-$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR" .OR. OPT_TCPIP_LIB.EQS."MULTINET" -
- .OR. OPT_TCPIP_LIB.EQS."UCX" .OR. OPT_TCPIP_LIB.EQS."TCPIP" -
- .OR. OPT_TCPIP_LIB.EQS."NONE"
-$ THEN
-$!
-$! Check to see if SOCKETSHR was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR"
-$ THEN
-$!
-$! Set the library to use SOCKETSHR
-$!
-$ TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
-$!
-$! Done with SOCKETSHR
-$!
-$ ENDIF
-$!
-$! Check to see if MULTINET was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."MULTINET"
-$ THEN
-$!
-$! Set the library to use UCX emulation.
-$!
-$ OPT_TCPIP_LIB = "UCX"
-$!
-$! Done with MULTINET
-$!
-$ ENDIF
-$!
-$! Check to see if UCX was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."UCX"
-$ THEN
-$!
-$! Set the library to use UCX.
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
-$ THEN
-$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
-$ ELSE
-$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
- TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
-$ ENDIF
-$!
-$! Done with UCX
-$!
-$ ENDIF
-$!
-$! Check to see if TCPIP was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."TCPIP"
-$ THEN
-$!
-$! Set the library to use TCPIP (post UCX).
-$!
-$ TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Check to see if NONE was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."NONE"
-$ THEN
-$!
-$! Do not use a TCPIP library.
-$!
-$ TCPIP_LIB = ""
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- ","
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",OPT_TCPIP_LIB," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
-$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
-$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! Done with TCP/IP libraries
-$!
-$ ENDIF
-$!
-$! Time To RETURN...
-$!
-$ RETURN
-$!
-$ INITIALISE:
-$!
-$! Save old value of the logical name OPENSSL
-$!
-$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
-$!
-$! Save directory information
-$!
-$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
-$ __HERE = F$EDIT(__HERE,"UPCASE")
-$ __TOP = __HERE - "ENGINES]"
-$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
-$!
-$! Set up the logical name OPENSSL to point at the include directory
-$!
-$ DEFINE OPENSSL /NOLOG '__INCLUDE'
-$!
-$! Done
-$!
-$ RETURN
-$!
-$ CLEANUP:
-$!
-$! Restore the saved logical name OPENSSL, if it had a value.
-$!
-$ if (f$type( __SAVE_OPENSSL) .nes. "")
-$ then
-$ IF __SAVE_OPENSSL .EQS. ""
-$ THEN
-$ DEASSIGN OPENSSL
-$ ELSE
-$ DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL'
-$ ENDIF
-$ endif
-$!
-$! Close any open files.
-$!
-$ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
- close objects
-$!
-$! Done
-$!
-$ RETURN
-$!
projects / cassiopeia.git / blobdiff