--- /dev/null
+/*
+ * Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+ *
+ * Licensed under the OpenSSL license (the "License"). You may not use
+ * this file except in compliance with the License. You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+
+#include "bio_lcl.h"
+
+#include <openssl/err.h>
+
+#ifndef OPENSSL_NO_SOCK
+# ifdef SO_MAXCONN
+# define MAX_LISTEN SO_MAXCONN
+# elif defined(SOMAXCONN)
+# define MAX_LISTEN SOMAXCONN
+# else
+# define MAX_LISTEN 32
+# endif
+
+/*-
+ * BIO_socket - create a socket
+ * @domain: the socket domain (AF_INET, AF_INET6, AF_UNIX, ...)
+ * @socktype: the socket type (SOCK_STEAM, SOCK_DGRAM)
+ * @protocol: the protocol to use (IPPROTO_TCP, IPPROTO_UDP)
+ * @options: BIO socket options (currently unused)
+ *
+ * Creates a socket. This should be called before calling any
+ * of BIO_connect and BIO_listen.
+ *
+ * Returns the file descriptor on success or INVALID_SOCKET on failure. On
+ * failure errno is set, and a status is added to the OpenSSL error stack.
+ */
+int BIO_socket(int domain, int socktype, int protocol, int options)
+{
+ int sock = -1;
+
+ if (BIO_sock_init() != 1)
+ return INVALID_SOCKET;
+
+ sock = socket(domain, socktype, protocol);
+ if (sock == -1) {
+ SYSerr(SYS_F_SOCKET, get_last_socket_error());
+ BIOerr(BIO_F_BIO_SOCKET, BIO_R_UNABLE_TO_CREATE_SOCKET);
+ return INVALID_SOCKET;
+ }
+
+ return sock;
+}
+
+/*-
+ * BIO_connect - connect to an address
+ * @sock: the socket to connect with
+ * @addr: the address to connect to
+ * @options: BIO socket options
+ *
+ * Connects to the address using the given socket and options.
+ *
+ * Options can be a combination of the following:
+ * - BIO_SOCK_KEEPALIVE: enable regularly sending keep-alive messages.
+ * - BIO_SOCK_NONBLOCK: Make the socket non-blocking.
+ * - BIO_SOCK_NODELAY: don't delay small messages.
+ *
+ * options holds BIO socket options that can be used
+ * You should call this for every address returned by BIO_lookup
+ * until the connection is successful.
+ *
+ * Returns 1 on success or 0 on failure. On failure errno is set
+ * and an error status is added to the OpenSSL error stack.
+ */
+int BIO_connect(int sock, const BIO_ADDR *addr, int options)
+{
+ int on = 1;
+
+ if (sock == -1) {
+ BIOerr(BIO_F_BIO_CONNECT, BIO_R_INVALID_SOCKET);
+ return 0;
+ }
+
+ if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
+ return 0;
+
+ if (options & BIO_SOCK_KEEPALIVE) {
+ if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)) != 0) {
+ SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_KEEPALIVE);
+ return 0;
+ }
+ }
+
+ if (options & BIO_SOCK_NODELAY) {
+ if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, &on, sizeof(on)) != 0) {
+ SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_NODELAY);
+ return 0;
+ }
+ }
+
+ if (connect(sock, BIO_ADDR_sockaddr(addr),
+ BIO_ADDR_sockaddr_size(addr)) == -1) {
+ if (!BIO_sock_should_retry(-1)) {
+ SYSerr(SYS_F_CONNECT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_CONNECT, BIO_R_CONNECT_ERROR);
+ }
+ return 0;
+ }
+ return 1;
+}
+
+/*-
+ * BIO_listen - Creates a listen socket
+ * @sock: the socket to listen with
+ * @addr: local address to bind to
+ * @options: BIO socket options
+ *
+ * Binds to the address using the given socket and options, then
+ * starts listening for incoming connections.
+ *
+ * Options can be a combination of the following:
+ * - BIO_SOCK_KEEPALIVE: enable regularly sending keep-alive messages.
+ * - BIO_SOCK_NONBLOCK: Make the socket non-blocking.
+ * - BIO_SOCK_NODELAY: don't delay small messages.
+ * - BIO_SOCK_REUSEADDR: Try to reuse the address and port combination
+ * for a recently closed port.
+ * - BIO_SOCK_V6_ONLY: When creating an IPv6 socket, make it listen only
+ * for IPv6 addresses and not IPv4 addresses mapped to IPv6.
+ *
+ * It's recommended that you set up both an IPv6 and IPv4 listen socket, and
+ * then check both for new clients that connect to it. You want to set up
+ * the socket as non-blocking in that case since else it could hang.
+ *
+ * Not all operating systems support IPv4 addresses on an IPv6 socket, and for
+ * others it's an option. If you pass the BIO_LISTEN_V6_ONLY it will try to
+ * create the IPv6 sockets to only listen for IPv6 connection.
+ *
+ * It could be that the first BIO_listen() call will listen to all the IPv6
+ * and IPv4 addresses and that then trying to bind to the IPv4 address will
+ * fail. We can't tell the difference between already listening ourself to
+ * it and someone else listening to it when failing and errno is EADDRINUSE, so
+ * it's recommended to not give an error in that case if the first call was
+ * successful.
+ *
+ * When restarting the program it could be that the port is still in use. If
+ * you set to BIO_SOCK_REUSEADDR option it will try to reuse the port anyway.
+ * It's recommended that you use this.
+ */
+int BIO_listen(int sock, const BIO_ADDR *addr, int options)
+{
+ int on = 1;
+ int socktype;
+ socklen_t socktype_len = sizeof(socktype);
+
+ if (sock == -1) {
+ BIOerr(BIO_F_BIO_LISTEN, BIO_R_INVALID_SOCKET);
+ return 0;
+ }
+
+ if (getsockopt(sock, SOL_SOCKET, SO_TYPE, &socktype, &socktype_len) != 0
+ || socktype_len != sizeof(socktype)) {
+ SYSerr(SYS_F_GETSOCKOPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_LISTEN, BIO_R_GETTING_SOCKTYPE);
+ return 0;
+ }
+
+ if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
+ return 0;
+
+# ifndef OPENSSL_SYS_WINDOWS
+ /* SO_REUSEADDR has different behavior on Windows than on
+ * other operating systems, don't set it there. */
+ if (options & BIO_SOCK_REUSEADDR) {
+ if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)) != 0) {
+ SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_REUSEADDR);
+ return 0;
+ }
+ }
+# endif
+
+ if (options & BIO_SOCK_KEEPALIVE) {
+ if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)) != 0) {
+ SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_KEEPALIVE);
+ return 0;
+ }
+ }
+
+ if (options & BIO_SOCK_NODELAY) {
+ if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, &on, sizeof(on)) != 0) {
+ SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_NODELAY);
+ return 0;
+ }
+ }
+
+# ifdef IPV6_V6ONLY
+ if ((options & BIO_SOCK_V6_ONLY) && BIO_ADDR_family(addr) == AF_INET6) {
+ if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, &on, sizeof(on)) != 0) {
+ SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_LISTEN, BIO_R_LISTEN_V6_ONLY);
+ return 0;
+ }
+ }
+# endif
+
+ if (bind(sock, BIO_ADDR_sockaddr(addr), BIO_ADDR_sockaddr_size(addr)) != 0) {
+ SYSerr(SYS_F_BIND, get_last_socket_error());
+ BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_BIND_SOCKET);
+ return 0;
+ }
+
+ if (socktype != SOCK_DGRAM && listen(sock, MAX_LISTEN) == -1) {
+ SYSerr(SYS_F_LISTEN, get_last_socket_error());
+ BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_LISTEN_SOCKET);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*-
+ * BIO_accept_ex - Accept new incoming connections
+ * @sock: the listening socket
+ * @addr: the BIO_ADDR to store the peer address in
+ * @options: BIO socket options, applied on the accepted socket.
+ *
+ */
+int BIO_accept_ex(int accept_sock, BIO_ADDR *addr_, int options)
+{
+ socklen_t len;
+ int accepted_sock;
+ BIO_ADDR locaddr;
+ BIO_ADDR *addr = addr_ == NULL ? &locaddr : addr_;
+
+ len = sizeof(*addr);
+ accepted_sock = accept(accept_sock,
+ BIO_ADDR_sockaddr_noconst(addr), &len);
+ if (accepted_sock == -1) {
+ if (!BIO_sock_should_retry(accepted_sock)) {
+ SYSerr(SYS_F_ACCEPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_ACCEPT_EX, BIO_R_ACCEPT_ERROR);
+ }
+ return INVALID_SOCKET;
+ }
+
+ if (!BIO_socket_nbio(accepted_sock, (options & BIO_SOCK_NONBLOCK) != 0)) {
+ closesocket(accepted_sock);
+ return INVALID_SOCKET;
+ }
+
+ return accepted_sock;
+}
+
+/*-
+ * BIO_closesocket - Close a socket
+ * @sock: the socket to close
+ */
+int BIO_closesocket(int sock)
+{
+ if (closesocket(sock) < 0)
+ return 0;
+ return 1;
+}
+#endif
projects / cassiopeia.git / blobdiff