+++ /dev/null
-$!
-$! MAKEAPPS.COM
-$! Written By: Robert Byer
-$! Vice-President
-$! A-Com Computing, Inc.
-$! byer@mail.all-net.net
-$!
-$! Changes by Richard Levitte <richard@levitte.org>
-$! Zoltan Arpadffy <zoli@polarhome.com>
-$!
-$! This command files compiles and creates all the various different
-$! "application" programs for the different types of encryption for OpenSSL.
-$! The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes
-$! ALPHA, IA64 or VAX, depending on your machine architecture.
-$!
-$! It was written so it would try to determine what "C" compiler to
-$! use or you can specify which "C" compiler to use.
-$!
-$! Specify DEBUG or NODEBUG as P1 to compile with or without debugger
-$! information.
-$!
-$! Specify which compiler at P2 to try to compile under.
-$!
-$! VAXC For VAX C.
-$! DECC For DEC C.
-$! GNUC For GNU C.
-$!
-$! If you don't specify a compiler, it will try to determine which
-$! "C" compiler to use.
-$!
-$! P3, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
-$!
-$! UCX for UCX
-$! SOCKETSHR for SOCKETSHR+NETLIB
-$! TCPIP for TCPIP (post UCX)
-$!
-$! P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
-$!
-$! P5, if defined, sets a choice of programs to compile.
-$!
-$! P6, if defined, specifies the C pointer size. Ignored on VAX.
-$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
-$! Supported values are:
-$!
-$! "" Compile with default (/NOPOINTER_SIZE)
-$! 32 Compile with /POINTER_SIZE=32 (SHORT)
-$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV])
-$! (Automatically select ARGV if compiler supports it.)
-$! 64= Compile with /POINTER_SIZE=64 (LONG).
-$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
-$!
-$! P7, if defined, specifies a directory where ZLIB files (zlib.h,
-$! libz.olb) may be found. Optionally, a non-default object library
-$! name may be included ("dev:[dir]libz_64.olb", for example).
-$!
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
- f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$ on control_c then goto exit
-$!
-$! Define A TCP/IP Library That We Will Need To Link To.
-$! (That Is, If We Need To Link To One.)
-$!
-$ TCPIP_LIB = ""
-$ ZLIB_LIB = ""
-$!
-$! Check What Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$! The Architecture Is VAX.
-$!
-$ ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$ ARCHD = ARCH
-$ LIB32 = "32"
-$ OPT_FILE = ""
-$ POINTER_SIZE = ""
-$!
-$! Define what programs should be compiled
-$!
-$ PROGRAMS := OPENSSL
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Define The CRYPTO Library.
-$!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB
-$!
-$! Define The SSL Library.
-$!
-$ SSL_LIB := SYS$DISK:[-.'ARCHD'.EXE.SSL]SSL_LIBSSL'LIB32'.OLB
-$!
-$! Define The OBJ and EXE Directories.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.APPS]
-$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.APPS]
-$!
-$! Specify the destination directory in any /MAP option.
-$!
-$ if (LINKMAP .eqs. "MAP")
-$ then
-$ LINKMAP = LINKMAP+ "=''EXE_DIR'"
-$ endif
-$!
-$! Add the location prefix to the linker options file name.
-$!
-$ if (OPT_FILE .nes. "")
-$ then
-$ OPT_FILE = EXE_DIR+ OPT_FILE
-$ endif
-$!
-$! Initialise logical names and such
-$!
-$ GOSUB INITIALISE
-$!
-$! Tell The User What Kind of Machine We Run On.
-$!
-$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'"
-$!
-$! Check To See If The OBJ Directory Exists.
-$!
-$ IF (F$PARSE(OBJ_DIR).EQS."")
-$ THEN
-$!
-$! It Dosen't Exist, So Create It.
-$!
-$ CREATE/DIRECTORY 'OBJ_DIR'
-$!
-$! End The OBJ Directory Check.
-$!
-$ ENDIF
-$!
-$! Check To See If The EXE Directory Exists.
-$!
-$ IF (F$PARSE(EXE_DIR).EQS."")
-$ THEN
-$!
-$! It Dosen't Exist, So Create It.
-$!
-$ CREATE/DIRECTORY 'EXE_DIR'
-$!
-$! End The EXE Directory Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have The Proper Libraries.
-$!
-$ GOSUB LIB_CHECK
-$!
-$! Check To See If We Have A Linker Option File.
-$!
-$ GOSUB CHECK_OPT_FILE
-$!
-$! Define The Application Files.
-$! NOTE: Some might think this list ugly. However, it's made this way to
-$! reflect the E_OBJ variable in Makefile as closely as possible, thereby
-$! making it fairly easy to verify that the lists are the same.
-$!
-$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
- "CA,PKCS7,CRL2P7,CRL,"+-
- "RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+-
- "X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+-
- "S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
- "CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
- "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS,SRP"
-$!
-$ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT"
-$!
-$ TCPIP_PROGRAMS = ",,"
-$ IF COMPILER .EQS. "VAXC" THEN -
- TCPIP_PROGRAMS = ",OPENSSL,"
-$!
-$! Setup exceptional compilations
-$!
-$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
-$!
-$ PHASE := LIB
-$!
-$ RESTART:
-$!
-$! Define An App Counter And Set It To "0".
-$!
-$ APP_COUNTER = 0
-$!
-$! Top Of The App Loop.
-$!
-$ NEXT_APP:
-$!
-$! Make The Application File Name
-$!
-$ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM")
-$!
-$! Create The Executable File Name.
-$!
-$ EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE"
-$!
-$! Check To See If We Are At The End Of The File List.
-$!
-$ IF (CURRENT_APP.EQS.",")
-$ THEN
-$ IF (PHASE.EQS."LIB")
-$ THEN
-$ PHASE := APP
-$ GOTO RESTART
-$ ELSE
-$ GOTO APP_DONE
-$ ENDIF
-$ ENDIF
-$!
-$! Increment The Counter.
-$!
-$ APP_COUNTER = APP_COUNTER + 1
-$!
-$! Decide if we're building the object files or not.
-$!
-$ IF (PHASE.EQS."LIB")
-$ THEN
-$!
-$! Define A Library File Counter And Set It To "-1".
-$! -1 Means The Application File Name Is To Be Used.
-$!
-$ LIB_COUNTER = -1
-$!
-$! Create a .OPT file for the object files
-$!
-$ OPEN /WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
-$!
-$! Top Of The File Loop.
-$!
-$ NEXT_LIB:
-$!
-$! O.K, Extract The File Name From The File List.
-$!
-$ IF LIB_COUNTER .GE. 0
-$ THEN
-$ FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM")
-$ ELSE
-$ FILE_NAME = CURRENT_APP
-$ ENDIF
-$!
-$! Check To See If We Are At The End Of The File List.
-$!
-$ IF (FILE_NAME.EQS.",")
-$ THEN
-$ CLOSE OBJECTS
-$ GOTO NEXT_APP
-$ ENDIF
-$!
-$! Increment The Counter.
-$!
-$ LIB_COUNTER = LIB_COUNTER + 1
-$!
-$! Create The Source File Name.
-$!
-$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
-$!
-$! Create The Object File Name.
-$!
-$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
-$ ON WARNING THEN GOTO NEXT_LIB
-$!
-$! Check To See If The File We Want To Compile Actually Exists.
-$!
-$ IF (F$SEARCH(SOURCE_FILE).EQS."")
-$ THEN
-$!
-$! Tell The User That The File Dosen't Exist.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Exit The Build.
-$!
-$ GOTO EXIT
-$!
-$! End The File Exist Check.
-$!
-$ ENDIF
-$!
-$! Tell The User What We Are Building.
-$!
-$ IF (PHASE.EQS."LIB")
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File."
-$ ELSE
-$ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program."
-$ ENDIF
-$!
-$! Compile The File.
-$!
-$ ON ERROR THEN GOTO NEXT_LIB
-$ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
-$ THEN
-$ CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ENDIF
-$ WRITE OBJECTS OBJECT_FILE
-$!
-$ GOTO NEXT_LIB
-$ ENDIF
-$!
-$! Check if this program works well without a TCPIP library
-$!
-$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS
-$ THEN
-$ WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library. Can't link. Skipping..."
-$ GOTO NEXT_APP
-$ ENDIF
-$!
-$! Link The Program.
-$!
-$ ON WARNING THEN GOTO NEXT_APP
-$!
-$! Don't Link With The RSAREF Routines And TCP/IP Library.
-$!
-$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /EXE='EXE_FILE' -
- 'EXE_DIR''CURRENT_APP'.OPT /OPTIONS, -
- 'SSL_LIB' /LIBRARY, -
- 'CRYPTO_LIB' /LIBRARY -
- 'TCPIP_LIB' -
- 'ZLIB_LIB' -
- ,'OPT_FILE' /OPTIONS
-$!
-$! Go Back And Do It Again.
-$!
-$ GOTO NEXT_APP
-$!
-$! All Done With This File.
-$!
-$ APP_DONE:
-$ EXIT:
-$!
-$! All Done, Time To Clean Up And Exit.
-$!
-$ GOSUB CLEANUP
-$ EXIT
-$!
-$! Check For The Link Option FIle.
-$!
-$ CHECK_OPT_FILE:
-$!
-$! Check To See If We Need To Make A VAX C Option File.
-$!
-$ IF (COMPILER.EQS."VAXC")
-$ THEN
-$!
-$! Check To See If We Already Have A VAX C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A VAX C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against
-! The Sharable VAX C Runtime Library.
-!
-SYS$SHARE:VAXCRTL.EXE/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The VAXC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A GNU C Option File.
-$!
-$ IF (COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If We Already Have A GNU C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A GNU C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against
-! The Sharable C Runtime Library.
-!
-GNU_CC:[000000]GCCLIB/LIBRARY
-SYS$SHARE:VAXCRTL/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A DEC C Option File.
-$!
-$ IF (COMPILER.EQS."DECC")
-$ THEN
-$!
-$! Check To See If We Already Have A DEC C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! Figure Out If We Need An AXP Or A VAX Linker Option File.
-$!
-$ IF ARCH.EQS."VAX"
-$ THEN
-$!
-$! We Need A DEC C Linker Option File For VAX.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against
-! The Sharable DEC C Runtime Library.
-!
-SYS$SHARE:DECC$SHR.EXE/SHARE
-$EOD
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Create The non-VAX Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File For non-VAX To Link Against
-! The Sharable C Runtime Library.
-!
-SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
-SYS$SHARE:CMA$OPEN_RTL/SHARE
-$EOD
-$!
-$! End The DEC C Option File Check.
-$!
-$ ENDIF
-$!
-$! End The Option File Search.
-$!
-$ ENDIF
-$!
-$! End The DEC C Check.
-$!
-$ ENDIF
-$!
-$! Tell The User What Linker Option File We Are Using.
-$!
-$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check To See If We Have The Appropiate Libraries.
-$!
-$ LIB_CHECK:
-$!
-$! Look For The Library LIBCRYPTO.OLB.
-$!
-$ IF (F$SEARCH(CRYPTO_LIB).EQS."")
-$ THEN
-$!
-$! Tell The User We Can't Find The LIBCRYPTO.OLB Library.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Can't Find The Library ",CRYPTO_LIB,"."
-$ WRITE SYS$OUTPUT "We Can't Link Without It."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Since We Can't Link Without It, Exit.
-$!
-$ EXIT
-$!
-$! End The Crypto Library Check.
-$!
-$ ENDIF
-$!
-$! Look For The Library LIBSSL.OLB.
-$!
-$ IF (F$SEARCH(SSL_LIB).EQS."")
-$ THEN
-$!
-$! Tell The User We Can't Find The LIBSSL.OLB Library.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Can't Find The Library ",SSL_LIB,"."
-$ WRITE SYS$OUTPUT "Some Of The Test Programs Need To Link To It."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Since We Can't Link Without It, Exit.
-$!
-$ EXIT
-$!
-$! End The SSL Library Check.
-$!
-$ ENDIF
-$!
-$! Time To Return.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check To See If P1 Is Blank.
-$!
-$ IF (P1.EQS."NODEBUG")
-$ THEN
-$!
-$! P1 Is NODEBUG, So Compile Without Debugger Information.
-$!
-$ DEBUGGER = "NODEBUG"
-$ LINKMAP = "NOMAP"
-$ TRACEBACK = "NOTRACEBACK"
-$ GCC_OPTIMIZE = "OPTIMIZE"
-$ CC_OPTIMIZE = "OPTIMIZE"
-$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Are To Compile With Debugger Information.
-$!
-$ IF (P1.EQS."DEBUG")
-$ THEN
-$!
-$! Compile With Debugger Information.
-$!
-$ DEBUGGER = "DEBUG"
-$ LINKMAP = "MAP"
-$ TRACEBACK = "TRACEBACK"
-$ GCC_OPTIMIZE = "NOOPTIMIZE"
-$ CC_OPTIMIZE = "NOOPTIMIZE"
-$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
-$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P1 Check.
-$!
-$ ENDIF
-$!
-$! Check P6 (POINTER_SIZE).
-$!
-$ IF (P6 .NES. "") .AND. (ARCH .NES. "VAX")
-$ THEN
-$!
-$ IF (P6 .EQS. "32")
-$ THEN
-$ POINTER_SIZE = " /POINTER_SIZE=32"
-$ ELSE
-$ POINTER_SIZE = F$EDIT( P6, "COLLAPSE, UPCASE")
-$ IF ((POINTER_SIZE .EQS. "64") .OR. -
- (POINTER_SIZE .EQS. "64=") .OR. -
- (POINTER_SIZE .EQS. "64=ARGV"))
-$ THEN
-$ ARCHD = ARCH+ "_64"
-$ LIB32 = ""
-$ IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=")
-$ THEN
-$! Explicit user choice: "64" or "64=ARGV".
-$ IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64"
-$ ELSE
-$ SET NOON
-$ DEFINE /USER_MODE SYS$OUTPUT NL:
-$ DEFINE /USER_MODE SYS$ERROR NL:
-$ CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL:
-$ IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000
-$ THEN
-$ ! If we got here, it means DCL complained like this:
-$ ! %DCL-W-NOVALU, value not allowed - remove value specification
-$ ! \64=\
-$ !
-$ ! If the compiler was run, logicals defined in /USER would
-$ ! have been deassigned automatically. However, when DCL
-$ ! complains, they aren't, so we do it here (it might be
-$ ! unnecessary, but just in case there will be another error
-$ ! message further on that we don't want to miss)
-$ DEASSIGN /USER_MODE SYS$ERROR
-$ DEASSIGN /USER_MODE SYS$OUTPUT
-$ ELSE
-$ POINTER_SIZE = POINTER_SIZE + "=ARGV"
-$ ENDIF
-$ SET ON
-$ ENDIF
-$ POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'"
-$!
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", P6, -
- " Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT -
- " """" : Compile with default (short) pointers."
-$ WRITE SYS$OUTPUT -
- " 32 : Compile with 32-bit (short) pointers."
-$ WRITE SYS$OUTPUT -
- " 64 : Compile with 64-bit (long) pointers (auto ARGV)."
-$ WRITE SYS$OUTPUT -
- " 64= : Compile with 64-bit (long) pointers (no ARGV)."
-$ WRITE SYS$OUTPUT -
- " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$ ENDIF
-$!
-$ ENDIF
-$!
-$! End The P6 (POINTER_SIZE) Check.
-$!
-$ ENDIF
-$!
-$! Set basic C compiler /INCLUDE directories.
-$!
-$ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]"
-$!
-$! Check To See If P2 Is Blank.
-$!
-$ IF (P2.EQS."")
-$ THEN
-$!
-$! O.K., The User Didn't Specify A Compiler, Let's Try To
-$! Find Out Which One To Use.
-$!
-$! Check To See If We Have GNU C.
-$!
-$ IF (F$TRNLNM("GNU_CC").NES."")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ P2 = "GNUC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Have VAXC Or DECC.
-$!
-$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ P2 = "DECC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ P2 = "VAXC"
-$!
-$! End The VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The DECC & VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The Compiler Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have A Option For P3.
-$!
-$ IF (P3.EQS."")
-$ THEN
-$!
-$! Find out what socket library we have available
-$!
-$ IF F$PARSE("SOCKETSHR:") .NES. ""
-$ THEN
-$!
-$! We have SOCKETSHR, and it is my opinion that it's the best to use.
-$!
-$ P3 = "SOCKETSHR"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$! Else, let's look for something else
-$!
-$ ELSE
-$!
-$! Like UCX (the reason to do this before Multinet is that the UCX
-$! emulation is easier to use...)
-$!
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
- .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
- .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
-$ THEN
-$!
-$! Last resort: a UCX or UCX-compatible library
-$!
-$ P3 = "UCX"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$! That was all...
-$!
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Set Up Initial CC Definitions, Possibly With User Ones
-$!
-$ CCDEFS = "MONOLITH"
-$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
-$ CCEXTRAFLAGS = ""
-$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "" !!! "MAYLOSEDATA3" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
-$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. ""
-$ THEN
-$ IF CCDISABLEWARNINGS .NES. "" THEN CCDISABLEWARNINGS = CCDISABLEWARNINGS + ","
-$ CCDISABLEWARNINGS = CCDISABLEWARNINGS + USER_CCDISABLEWARNINGS
-$ ENDIF
-$!
-$! Check To See If We Have A ZLIB Option.
-$!
-$ ZLIB = P7
-$ IF (ZLIB .NES. "")
-$ THEN
-$!
-$! Check for expected ZLIB files.
-$!
-$ err = 0
-$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
-$ if (f$search( file1) .eqs. "")
-$ then
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$ WRITE SYS$OUTPUT " Can't find header: ''file1'"
-$ err = 1
-$ endif
-$ file1 = f$parse( "A.;", ZLIB)- "A.;"
-$!
-$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
-$ if (f$search( file2) .eqs. "")
-$ then
-$ if (err .eq. 0)
-$ then
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$ endif
-$ WRITE SYS$OUTPUT " Can't find library: ''file2'"
-$ WRITE SYS$OUTPUT ""
-$ err = err+ 2
-$ endif
-$ if (err .eq. 1)
-$ then
-$ WRITE SYS$OUTPUT ""
-$ endif
-$!
-$ if (err .ne. 0)
-$ then
-$ EXIT
-$ endif
-$!
-$ CCDEFS = """ZLIB=1"", "+ CCDEFS
-$ CC_INCLUDES = CC_INCLUDES+ ", "+ file1
-$ ZLIB_LIB = ", ''file2' /library"
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2
-$!
-$! End The ZLIB Check.
-$!
-$ ENDIF
-$!
-$! Check To See If The User Entered A Valid Parameter.
-$!
-$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If The User Wanted DECC.
-$!
-$ IF (P2.EQS."DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! Use DECC...
-$!
-$ CC = "CC"
-$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
- THEN CC = "CC/DECC"
-$ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
- "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
- " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "VAX_DECC_OPTIONS.OPT"
-$!
-$! End DECC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use VAXC.
-$!
-$ IF (P2.EQS."VAXC")
-$ THEN
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! Compile Using VAXC.
-$!
-$ CC = "CC"
-$ IF ARCH.NES."VAX"
-$ THEN
-$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
-$ EXIT
-$ ENDIF
-$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
-$ CCDEFS = CCDEFS + ",""VAXC"""
-$!
-$! Define <sys> As SYS$COMMON:[SYSLIB]
-$!
-$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "VAX_VAXC_OPTIONS.OPT"
-$!
-$! End VAXC Check
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use GNU C.
-$!
-$ IF (P2.EQS."GNUC")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! Use GNU C...
-$!
-$ IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
-$ CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "VAX_GNUC_OPTIONS.OPT"
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Set up default defines
-$!
-$ CCDEFS = """FLAT_INC=1""," + CCDEFS
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
-$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
-$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$ ENDIF
-$!
-$! Time to check the contents, and to make sure we get the correct library.
-$!
-$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" -
- .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE"
-$ THEN
-$!
-$! Check to see if SOCKETSHR was chosen
-$!
-$ IF P3.EQS."SOCKETSHR"
-$ THEN
-$!
-$! Set the library to use SOCKETSHR
-$!
-$ TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
-$!
-$! Done with SOCKETSHR
-$!
-$ ENDIF
-$!
-$! Check to see if MULTINET was chosen
-$!
-$ IF P3.EQS."MULTINET"
-$ THEN
-$!
-$! Set the library to use UCX emulation.
-$!
-$ P3 = "UCX"
-$!
-$! Done with MULTINET
-$!
-$ ENDIF
-$!
-$! Check to see if UCX was chosen
-$!
-$ IF P3.EQS."UCX"
-$ THEN
-$!
-$! Set the library to use UCX.
-$!
-$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
-$ THEN
-$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
-$ ELSE
-$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
- TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
-$ ENDIF
-$!
-$! Done with UCX
-$!
-$ ENDIF
-$!
-$! Check to see if TCPIP (post UCX) was chosen
-$!
-$ IF P3.EQS."TCPIP"
-$ THEN
-$!
-$! Set the library to use TCPIP.
-$!
-$ TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Check to see if NONE was chosen
-$!
-$ IF P3.EQS."NONE"
-$ THEN
-$!
-$! Do not use TCPIP.
-$!
-$ TCPIP_LIB = ""
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Add TCP/IP type to CC definitions.
-$!
-$ CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- ","
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
-$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
-$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! Done with TCP/IP libraries
-$!
-$ ENDIF
-$!
-$! Finish up the definition of CC.
-$!
-$ IF COMPILER .EQS. "DECC"
-$ THEN
-$! Not all compiler versions support MAYLOSEDATA3.
-$ OPT_TEST = "MAYLOSEDATA3"
-$ DEFINE /USER_MODE SYS$ERROR NL:
-$ DEFINE /USER_MODE SYS$OUTPUT NL:
-$ 'CC' /NOCROSS_REFERENCE /NOLIST /NOOBJECT -
- /WARNINGS = DISABLE = ('OPT_TEST', EMPTYFILE) NL:
-$ IF ($SEVERITY)
-$ THEN
-$ IF CCDISABLEWARNINGS .NES. "" THEN -
- CCDISABLEWARNINGS = CCDISABLEWARNINGS+ ","
-$ CCDISABLEWARNINGS = CCDISABLEWARNINGS+ OPT_TEST
-$ ENDIF
-$ IF CCDISABLEWARNINGS .NES. ""
-$ THEN
-$ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
-$ ENDIF
-$ ELSE
-$ CCDISABLEWARNINGS = ""
-$ ENDIF
-$ CC2 = CC + " /DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
-$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
-$!
-$! Show user the result
-$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For P4.
-$!
-$ IF (P4.EQS."")
-$ THEN
-$!
-$! Get The Version Of VMS We Are Using.
-$!
-$ ISSEVEN :=
-$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
-$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$! Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$ IF (TMP.GE.71)
-$ THEN
-$!
-$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$ ISSEVEN := ,PTHREAD_USE_D4
-$!
-$! End The VMS Version Check.
-$!
-$ ENDIF
-$!
-$! End The P4 Check.
-$!
-$ ENDIF
-$!
-$! Check if the user wanted to compile just a subset of all the programs.
-$!
-$ IF P5 .NES. ""
-$ THEN
-$ PROGRAMS = P5
-$ ENDIF
-$!
-$! Time To RETURN...
-$!
-$ RETURN
-$!
-$ INITIALISE:
-$!
-$! Save old value of the logical name OPENSSL
-$!
-$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
-$!
-$! Save directory information
-$!
-$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
-$ __HERE = F$EDIT(__HERE,"UPCASE")
-$ __TOP = __HERE - "APPS]"
-$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
-$!
-$! Set up the logical name OPENSSL to point at the include directory
-$!
-$ DEFINE OPENSSL /NOLOG '__INCLUDE'
-$!
-$! Done
-$!
-$ RETURN
-$!
-$ CLEANUP:
-$!
-$! Restore the saved logical name OPENSSL, if it had a value.
-$!
-$ if (f$type( __SAVE_OPENSSL) .nes. "")
-$ then
-$ IF __SAVE_OPENSSL .EQS. ""
-$ THEN
-$ DEASSIGN OPENSSL
-$ ELSE
-$ DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL'
-$ ENDIF
-$ endif
-$!
-$! Close any open files.
-$!
-$ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
- close objects
-$!
-$! Done
-$!
-$ RETURN
-$!
projects / cassiopeia.git / blobdiff