--- /dev/null
+#! /usr/bin/env perl
+# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+
+use strict;
+use warnings;
+
+use POSIX;
+use File::Basename;
+use File::Copy;
+use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
+use OpenSSL::Test::Utils;
+
+setup("test_ssl");
+
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+
+my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
+ $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
+ $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
+ anydisabled qw/rsa dsa dh ec srp psk
+ ssl3 tls1 tls1_1 tls1_2
+ dtls dtls1 dtls1_2 ct/;
+my $no_anytls = alldisabled(available_protocols("tls"));
+my $no_anydtls = alldisabled(available_protocols("dtls"));
+
+plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
+ if $no_anytls && $no_anydtls;
+
+my $digest = "-sha1";
+my @reqcmd = ("openssl", "req");
+my @x509cmd = ("openssl", "x509", $digest);
+my @verifycmd = ("openssl", "verify");
+my @gendsacmd = ("openssl", "gendsa");
+my $dummycnf = srctop_file("apps", "openssl.cnf");
+
+my $CAkey = "keyCA.ss";
+my $CAcert="certCA.ss";
+my $CAserial="certCA.srl";
+my $CAreq="reqCA.ss";
+my $CAconf=srctop_file("test","CAss.cnf");
+my $CAreq2="req2CA.ss"; # temp
+
+my $Uconf=srctop_file("test","Uss.cnf");
+my $Ukey="keyU.ss";
+my $Ureq="reqU.ss";
+my $Ucert="certU.ss";
+
+my $Dkey="keyD.ss";
+my $Dreq="reqD.ss";
+my $Dcert="certD.ss";
+
+my $Ekey="keyE.ss";
+my $Ereq="reqE.ss";
+my $Ecert="certE.ss";
+
+my $P1conf=srctop_file("test","P1ss.cnf");
+my $P1key="keyP1.ss";
+my $P1req="reqP1.ss";
+my $P1cert="certP1.ss";
+my $P1intermediate="tmp_intP1.ss";
+
+my $P2conf=srctop_file("test","P2ss.cnf");
+my $P2key="keyP2.ss";
+my $P2req="reqP2.ss";
+my $P2cert="certP2.ss";
+my $P2intermediate="tmp_intP2.ss";
+
+my $server_sess="server.ss";
+my $client_sess="client.ss";
+
+# ssltest_old.c is deprecated in favour of the new framework in ssl_test.c
+# If you're adding tests here, you probably want to convert them to the
+# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
+plan tests =>
+ 1 # For testss
+ +6 # For the first testssl
+ ;
+
+subtest 'test_ss' => sub {
+ if (testss()) {
+ open OUT, ">", "intP1.ss";
+ copy($CAcert, \*OUT); copy($Ucert, \*OUT);
+ close OUT;
+
+ open OUT, ">", "intP2.ss";
+ copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
+ close OUT;
+ }
+};
+
+note('test_ssl -- key U');
+testssl("keyU.ss", $Ucert, $CAcert);
+
+# -----------
+# subtest functions
+sub testss {
+ open RND, ">>", ".rnd";
+ print RND "string to make the random number generator think it has entropy";
+ close RND;
+
+ my @req_dsa = ("-newkey",
+ "dsa:".srctop_file("apps", "dsa1024.pem"));
+ my $dsaparams = srctop_file("apps", "dsa1024.pem");
+ my @req_new;
+ if ($no_rsa) {
+ @req_new = @req_dsa;
+ } else {
+ @req_new = ("-new");
+ }
+
+ plan tests => 17;
+
+ SKIP: {
+ skip 'failure', 16 unless
+ ok(run(app([@reqcmd, "-config", $CAconf,
+ "-out", $CAreq, "-keyout", $CAkey,
+ @req_new])),
+ 'make cert request');
+
+ skip 'failure', 15 unless
+ ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
+ "-req", "-out", $CAcert, "-signkey", $CAkey,
+ "-extfile", $CAconf, "-extensions", "v3_ca"],
+ stdout => "err.ss")),
+ 'convert request into self-signed cert');
+
+ skip 'failure', 14 unless
+ ok(run(app([@x509cmd, "-in", $CAcert,
+ "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
+ stdout => "err.ss")),
+ 'convert cert into a cert request');
+
+ skip 'failure', 13 unless
+ ok(run(app([@reqcmd, "-config", $dummycnf,
+ "-verify", "-in", $CAreq, "-noout"])),
+ 'verify request 1');
+
+
+ skip 'failure', 12 unless
+ ok(run(app([@reqcmd, "-config", $dummycnf,
+ "-verify", "-in", $CAreq2, "-noout"])),
+ 'verify request 2');
+
+ skip 'failure', 11 unless
+ ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
+ 'verify signature');
+
+ skip 'failure', 10 unless
+ ok(run(app([@reqcmd, "-config", $Uconf,
+ "-out", $Ureq, "-keyout", $Ukey, @req_new],
+ stdout => "err.ss")),
+ 'make a user cert request');
+
+ skip 'failure', 9 unless
+ ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
+ "-req", "-out", $Ucert,
+ "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
+ "-extfile", $Uconf, "-extensions", "v3_ee"],
+ stdout => "err.ss"))
+ && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
+ 'sign user cert request');
+
+ skip 'failure', 8 unless
+ ok(run(app([@x509cmd,
+ "-subject", "-issuer", "-startdate", "-enddate",
+ "-noout", "-in", $Ucert])),
+ 'Certificate details');
+
+ skip 'failure', 7 unless
+ subtest 'DSA certificate creation' => sub {
+ plan skip_all => "skipping DSA certificate creation"
+ if $no_dsa;
+
+ plan tests => 5;
+
+ SKIP: {
+ $ENV{CN2} = "DSA Certificate";
+ skip 'failure', 4 unless
+ ok(run(app([@gendsacmd, "-out", $Dkey,
+ $dsaparams],
+ stdout => "err.ss")),
+ "make a DSA key");
+ skip 'failure', 3 unless
+ ok(run(app([@reqcmd, "-new", "-config", $Uconf,
+ "-out", $Dreq, "-key", $Dkey],
+ stdout => "err.ss")),
+ "make a DSA user cert request");
+ skip 'failure', 2 unless
+ ok(run(app([@x509cmd, "-CAcreateserial",
+ "-in", $Dreq,
+ "-days", "30",
+ "-req",
+ "-out", $Dcert,
+ "-CA", $CAcert, "-CAkey", $CAkey,
+ "-CAserial", $CAserial,
+ "-extfile", $Uconf,
+ "-extensions", "v3_ee_dsa"],
+ stdout => "err.ss")),
+ "sign DSA user cert request");
+ skip 'failure', 1 unless
+ ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
+ "verify DSA user cert");
+ skip 'failure', 0 unless
+ ok(run(app([@x509cmd,
+ "-subject", "-issuer",
+ "-startdate", "-enddate", "-noout",
+ "-in", $Dcert])),
+ "DSA Certificate details");
+ }
+ };
+
+ skip 'failure', 6 unless
+ subtest 'ECDSA/ECDH certificate creation' => sub {
+ plan skip_all => "skipping ECDSA/ECDH certificate creation"
+ if $no_ec;
+
+ plan tests => 5;
+
+ SKIP: {
+ $ENV{CN2} = "ECDSA Certificate";
+ skip 'failure', 4 unless
+ ok(run(app(["openssl", "ecparam", "-name", "P-256",
+ "-out", "ecp.ss"])),
+ "make EC parameters");
+ skip 'failure', 3 unless
+ ok(run(app([@reqcmd, "-config", $Uconf,
+ "-out", $Ereq, "-keyout", $Ekey,
+ "-newkey", "ec:ecp.ss"],
+ stdout => "err.ss")),
+ "make a ECDSA/ECDH user cert request");
+ skip 'failure', 2 unless
+ ok(run(app([@x509cmd, "-CAcreateserial",
+ "-in", $Ereq,
+ "-days", "30",
+ "-req",
+ "-out", $Ecert,
+ "-CA", $CAcert, "-CAkey", $CAkey,
+ "-CAserial", $CAserial,
+ "-extfile", $Uconf,
+ "-extensions", "v3_ee_ec"],
+ stdout => "err.ss")),
+ "sign ECDSA/ECDH user cert request");
+ skip 'failure', 1 unless
+ ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
+ "verify ECDSA/ECDH user cert");
+ skip 'failure', 0 unless
+ ok(run(app([@x509cmd,
+ "-subject", "-issuer",
+ "-startdate", "-enddate", "-noout",
+ "-in", $Ecert])),
+ "ECDSA Certificate details");
+ }
+ };
+
+ skip 'failure', 5 unless
+ ok(run(app([@reqcmd, "-config", $P1conf,
+ "-out", $P1req, "-keyout", $P1key, @req_new],
+ stdout => "err.ss")),
+ 'make a proxy cert request');
+
+
+ skip 'failure', 4 unless
+ ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
+ "-req", "-out", $P1cert,
+ "-CA", $Ucert, "-CAkey", $Ukey,
+ "-extfile", $P1conf, "-extensions", "v3_proxy"],
+ stdout => "err.ss")),
+ 'sign proxy with user cert');
+
+ copy($Ucert, $P1intermediate);
+ run(app([@verifycmd, "-CAfile", $CAcert,
+ "-untrusted", $P1intermediate, $P1cert]));
+ ok(run(app([@x509cmd,
+ "-subject", "-issuer", "-startdate", "-enddate",
+ "-noout", "-in", $P1cert])),
+ 'Certificate details');
+
+ skip 'failure', 2 unless
+ ok(run(app([@reqcmd, "-config", $P2conf,
+ "-out", $P2req, "-keyout", $P2key,
+ @req_new],
+ stdout => "err.ss")),
+ 'make another proxy cert request');
+
+
+ skip 'failure', 1 unless
+ ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
+ "-req", "-out", $P2cert,
+ "-CA", $P1cert, "-CAkey", $P1key,
+ "-extfile", $P2conf, "-extensions", "v3_proxy"],
+ stdout => "err.ss")),
+ 'sign second proxy cert request with the first proxy cert');
+
+
+ open OUT, ">", $P2intermediate;
+ copy($Ucert, \*OUT); copy($P1cert, \*OUT);
+ close OUT;
+ run(app([@verifycmd, "-CAfile", $CAcert,
+ "-untrusted", $P2intermediate, $P2cert]));
+ ok(run(app([@x509cmd,
+ "-subject", "-issuer", "-startdate", "-enddate",
+ "-noout", "-in", $P2cert])),
+ 'Certificate details');
+ }
+}
+
+sub testssl {
+ my ($key, $cert, $CAtmp) = @_;
+ my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
+
+ my @ssltest = ("ssltest_old",
+ "-s_key", $key, "-s_cert", $cert,
+ "-c_key", $key, "-c_cert", $cert);
+
+ my $serverinfo = srctop_file("test","serverinfo.pem");
+
+ my $dsa_cert = 0;
+ if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
+ "-text", "-noout"]), capture => 1)) {
+ $dsa_cert = 1;
+ }
+
+
+ # plan tests => 11;
+
+ subtest 'standard SSL tests' => sub {
+ ######################################################################
+ plan tests => 21;
+
+ SKIP: {
+ skip "SSLv3 is not supported by this OpenSSL build", 4
+ if disabled("ssl3");
+
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
+ 'test sslv3 via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
+ 'test sslv3 with server authentication via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
+ 'test sslv3 with client authentication via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
+ 'test sslv3 with both server and client authentication via BIO pair');
+ }
+
+ SKIP: {
+ skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
+ if $no_anytls;
+
+ ok(run(test([@ssltest, "-bio_pair"])),
+ 'test sslv2/sslv3 via BIO pair');
+ }
+
+ SKIP: {
+ skip "DTLSv1 is not supported by this OpenSSL build", 4
+ if disabled("dtls1");
+
+ ok(run(test([@ssltest, "-dtls1"])),
+ 'test dtlsv1');
+ ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA])),
+ 'test dtlsv1 with server authentication');
+ ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA])),
+ 'test dtlsv1 with client authentication');
+ ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA])),
+ 'test dtlsv1 with both server and client authentication');
+ }
+
+ SKIP: {
+ skip "DTLSv1.2 is not supported by this OpenSSL build", 4
+ if disabled("dtls1_2");
+
+ ok(run(test([@ssltest, "-dtls12"])),
+ 'test dtlsv1.2');
+ ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA])),
+ 'test dtlsv1.2 with server authentication');
+ ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA])),
+ 'test dtlsv1.2 with client authentication');
+ ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA])),
+ 'test dtlsv1.2 with both server and client authentication');
+ }
+
+ SKIP: {
+ skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
+ if $no_anytls;
+
+ SKIP: {
+ skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
+
+ ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
+ 'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
+ }
+
+ ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
+ 'test sslv2/sslv3 with 1024bit DHE via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
+ 'test sslv2/sslv3 with server authentication');
+ ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
+ 'test sslv2/sslv3 with client authentication via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
+ 'test sslv2/sslv3 with both client and server authentication via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
+ 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
+
+ SKIP: {
+ skip "No IPv4 available on this machine", 1
+ unless !disabled("sock") && have_IPv4();
+ ok(run(test([@ssltest, "-ipv4"])),
+ 'test TLS via IPv4');
+ }
+
+ SKIP: {
+ skip "No IPv6 available on this machine", 1
+ unless !disabled("sock") && have_IPv6();
+ ok(run(test([@ssltest, "-ipv6"])),
+ 'test TLS via IPv6');
+ }
+ }
+ };
+
+ subtest "Testing ciphersuites" => sub {
+
+ my @exkeys = ();
+ my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
+
+ if ($no_dh) {
+ note "skipping DHE tests\n";
+ $ciphers .= ":-kDHE";
+ }
+ if ($no_dsa) {
+ note "skipping DSA tests\n";
+ $ciphers .= ":-aDSA";
+ } else {
+ push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
+ }
+
+ if ($no_ec) {
+ note "skipping EC tests\n";
+ $ciphers .= ":!aECDSA:!kECDH";
+ } else {
+ push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
+ }
+
+ my @protocols = ();
+ # FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
+ push(@protocols, "TLSv1.2") unless $no_tls1_2;
+ push(@protocols, "SSLv3") unless $no_ssl3;
+ my $protocolciphersuitcount = 0;
+ my %ciphersuites =
+ map { my @c =
+ map { split(/:/, $_) }
+ run(app(["openssl", "ciphers", "${_}:$ciphers"]),
+ capture => 1);
+ map { s/\R//; } @c; # chomp @c;
+ $protocolciphersuitcount += scalar @c;
+ $_ => [ @c ] } @protocols;
+
+ plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
+ if $protocolciphersuitcount + scalar(@protocols) == 0;
+
+ # The count of protocols is because in addition to the ciphersuits
+ # we got above, we're running a weak DH test for each protocol
+ plan tests => $protocolciphersuitcount + scalar(@protocols);
+
+ foreach my $protocol (@protocols) {
+ note "Testing ciphersuites for $protocol";
+ foreach my $cipher (@{$ciphersuites{$protocol}}) {
+ ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
+ $protocol eq "SSLv3" ? ("-ssl3") : ()])),
+ "Testing $cipher");
+ }
+ is(run(test([@ssltest,
+ "-s_cipher", "EDH",
+ "-c_cipher", 'EDH:@SECLEVEL=1',
+ "-dhe512",
+ $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
+ "testing connection with weak DH, expecting failure");
+ }
+ };
+
+ subtest 'RSA/(EC)DHE/PSK tests' => sub {
+ ######################################################################
+
+ plan tests => 5;
+
+ SKIP: {
+ skip "TLSv1.0 is not supported by this OpenSSL build", 5
+ if $no_tls1;
+
+ SKIP: {
+ skip "skipping anonymous DH tests", 1
+ if ($no_dh);
+
+ ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
+ 'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
+ }
+
+ SKIP: {
+ skip "skipping RSA tests", 2
+ if $no_rsa;
+
+ ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
+ 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
+
+ skip "skipping RSA+DHE tests", 1
+ if $no_dh;
+
+ ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
+ 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
+ }
+
+ SKIP: {
+ skip "skipping PSK tests", 2
+ if ($no_psk);
+
+ ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
+ 'test tls1 with PSK');
+
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
+ 'test tls1 with PSK via BIO pair');
+ }
+ }
+
+ };
+
+ subtest 'Custom Extension tests' => sub {
+ ######################################################################
+
+ plan tests => 1;
+
+ SKIP: {
+ skip "TLSv1.0 is not supported by this OpenSSL build", 1
+ if $no_tls1;
+
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
+ 'test tls1 with custom extensions');
+ }
+ };
+
+ subtest 'Serverinfo tests' => sub {
+ ######################################################################
+
+ plan tests => 5;
+
+ SKIP: {
+ skip "TLSv1.0 is not supported by this OpenSSL build", 5
+ if $no_tls1;
+
+ note('echo test tls1 with serverinfo');
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
+ }
+ };
+
+ subtest 'SRP tests' => sub {
+
+ plan tests => 4;
+
+ SKIP: {
+ skip "skipping SRP tests", 4
+ if $no_srp || alldisabled(grep !/^ssl3/, available_protocols("tls"));
+
+ ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
+ 'test tls1 with SRP');
+
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
+ 'test tls1 with SRP via BIO pair');
+
+ ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
+ 'test tls1 with SRP auth');
+
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
+ 'test tls1 with SRP auth via BIO pair');
+ }
+ };
+}
+
+unlink $CAkey;
+unlink $CAcert;
+unlink $CAserial;
+unlink $CAreq;
+unlink $CAreq2;
+
+unlink $Ukey;
+unlink $Ureq;
+unlink $Ucert;
+unlink basename($Ucert, '.ss').'.srl';
+
+unlink $Dkey;
+unlink $Dreq;
+unlink $Dcert;
+
+unlink $Ekey;
+unlink $Ereq;
+unlink $Ecert;
+
+unlink $P1key;
+unlink $P1req;
+unlink $P1cert;
+unlink basename($P1cert, '.ss').'.srl';
+unlink $P1intermediate;
+unlink "intP1.ss";
+
+unlink $P2key;
+unlink $P2req;
+unlink $P2cert;
+unlink $P2intermediate;
+unlink "intP2.ss";
+
+unlink "ecp.ss";
+unlink "err.ss";
+
+unlink $server_sess;
+unlink $client_sess;
projects / cassiopeia.git / blobdiff